How to Change Your Pur Faucet Filter in 3 Easy Steps

How to Change a Pur Faucet Filter

Your Pur faucet filter is a great way to improve the taste and quality of your tap water. But over time, the filter will become clogged with sediment and bacteria, which can reduce its effectiveness. To keep your water clean and fresh, it’s important to change the filter regularly.

Changing a Pur faucet filter is a simple task that can be completed in just a few minutes. In this article, we’ll walk you through the process, step-by-step. We’ll also provide some tips on how to choose the right filter for your needs.

So whether you’re a new Pur owner or you’re just looking to freshen up your old filter, read on for all the information you need to know.

Step	Instructions	Image
1	Turn off the water supply to the faucet.
2	Loosen the faucet handle and remove it.
3	Unscrew the old filter and replace it with a new one.
4	Reattach the faucet handle and turn on the water supply.

How to Change a Pur Faucet Filter

Tools and Materials

• Pur faucet filter
• Replacement filter cartridge
• Adjustable wrench
• Penetrating oil
• Paper towels

Step-by-step Instructions

1. Turn off the water supply to the faucet. This is usually located under the sink.
2. Loosen the nut that holds the filter cartridge in place. You may need to use a wrench to do this.
3. Remove the old filter cartridge and discard it.
4. Apply a small amount of penetrating oil to the threads of the new filter cartridge.
5. Insert the new filter cartridge into the faucet.
6. Tighten the nut to secure the filter cartridge in place.
7. Turn on the water supply to the faucet.
8. Flush the faucet for a few minutes to remove any debris from the new filter.

Troubleshooting

If you are having trouble changing the filter, here are a few things you can check:

• Make sure that the water supply to the faucet is turned off.
• Make sure that you are using the correct size of filter cartridge.
• Make sure that you are tightening the nut on the filter cartridge enough.
• If you are still having trouble, you may need to contact a plumber.

Changing a Pur faucet filter is a simple task that can be completed in a few minutes. By following these instructions, you can ensure that your water is clean and free of contaminants.

How to Change Pur Faucet Filter?

Pur faucet filters are a great way to improve the quality of your water, but they need to be replaced regularly to keep working effectively. Changing a Pur faucet filter is a simple process that can be completed in just a few minutes.

What you will need

• New Pur faucet filter
• Adjustable wrench
• Paper towels
• Bucket

Step 1: Turn off the water supply to the faucet

The first step is to turn off the water supply to the faucet. This can usually be done by turning the shut-off valve located under the sink. Once the water supply is turned off, you can proceed to the next step.

Step 2: Remove the old filter cartridge

The next step is to remove the old filter cartridge. To do this, you will need to use an adjustable wrench to loosen the nut that is holding the filter cartridge in place. Once the nut is loosened, you can carefully turn the filter cartridge counterclockwise and remove it from the faucet.

Step 3: Clean the faucet housing

Once the old filter cartridge is removed, you will need to clean the faucet housing. This can be done by wiping it down with a paper towel that has been dampened with warm water. Be sure to remove any dirt or debris that may be present.

Step 4: Insert the new filter cartridge

The next step is to insert the new filter cartridge into the faucet housing. To do this, you will need to line up the tabs on the filter cartridge with the slots in the faucet housing. Once the filter cartridge is properly aligned, you can carefully turn it clockwise until it is snugly in place.

Step 5: Turn on the water supply to the faucet

The final step is to turn on the water supply to the faucet. Once the water supply is turned on, you should allow the water to run for a few minutes to flush out any debris that may be present.

Changing a Pur faucet filter is a simple process that can be completed in just a few minutes. By following these steps, you can ensure that your Pur faucet filter is working effectively and that you are getting the best possible water quality.

How do I change my Pur faucet filter?

1. Turn off the water supply to the faucet. This is usually located under the sink.
2. Remove the old filter. The filter is located at the end of the faucet spout. To remove it, twist it counterclockwise until it comes loose.
3. Insert the new filter. Make sure that the new filter is oriented correctly. The arrow on the filter should point towards the faucet.
4. Turn on the water supply to the faucet.
5. Flush the filter by running water through the faucet for a few minutes. This will remove any debris that may be in the filter.

How often should I change my Pur faucet filter?

The Pur faucet filter should be changed every 6 months or 1,000 gallons of water, whichever comes first.

What are the signs that my Pur faucet filter needs to be changed?

There are a few signs that your Pur faucet filter may need to be changed, including:

• The water flow from the faucet is reduced.
• The water tastes or smells bad.
• The water is cloudy or discolored.

Can I clean my Pur faucet filter instead of replacing it?

You can clean your Pur faucet filter, but it is not recommended. Cleaning the filter may not remove all of the contaminants, and it may also damage the filter. It is best to replace the filter every 6 months or 1,000 gallons of water, whichever comes first.

Where can I buy a replacement Pur faucet filter?

Pur faucet filters are available at most home improvement stores and online retailers.

What if I have other questions about my Pur faucet filter?

If you have other questions about your Pur faucet filter, you can contact Pur customer service for assistance.

Changing a Pur faucet filter is a simple task that can be completed in a few minutes. By following the steps in this guide, you can ensure that your water is clean and fresh, and that your Pur faucet filter is working properly.

Here are the key takeaways from this guide:

• Pur faucet filters remove a variety of impurities from your water, including lead, chlorine, and sediment.
• Changing your Pur faucet filter is a simple task that can be completed in a few minutes.
• It is important to change your Pur faucet filter according to the manufacturer’s instructions to ensure that your water is clean and fresh.
• By following the steps in this guide, you can easily change your Pur faucet filter and keep your water clean and fresh.