How to Change an RV Toilet in 5 Easy Steps

How to Change an RV Toilet

RV toilets are a necessity for any RVer, but they can also be a source of trouble. If your RV toilet is leaking, clogged, or simply not working properly, you may need to replace it. Changing an RV toilet is a relatively simple task, but it does require some basic tools and knowledge. In this article, we will walk you through the process of changing an RV toilet, step-by-step.

We’ll start by discussing the different types of RV toilets and the tools you’ll need for the job. Then, we’ll walk you through the steps of removing the old toilet, installing the new toilet, and testing it to make sure it’s working properly. By the end of this article, you’ll be able to change your RV toilet like a pro!

“`html

Step	Instructions	Image
1	Turn off the water supply to the toilet.
2	Remove the toilet seat.
3	Disconnect the water line and the drain hose.
4	Remove the old toilet.
5	Install the new toilet.
6	Reconnect the water line and the drain hose.
7	Turn on the water supply to the toilet.
8	Test the toilet to make sure it is working properly.

“`

Changing an RV toilet is a relatively simple task that can be completed in about an hour. However, it is important to follow the steps carefully to avoid damaging the toilet or the RV. This guide will walk you through the process of replacing an RV toilet, step-by-step.

Gather Your Materials

Before you begin, gather all of the materials you will need. This includes:

• RV toilet
• New RV toilet
• Pliers
• Wrench
• Tape measure
• Gloves
• Safety glasses

Prepare the RV Toilet

The first step is to prepare the RV toilet for removal. This involves turning off the water supply to the toilet, flushing the toilet to empty the tank, and removing the toilet seat.

1. Turn off the water supply to the toilet by turning the shut-off valve located under the sink.
2. Flush the toilet to empty the tank.
3. Remove the toilet seat by unscrewing the two bolts that secure it to the toilet bowl.
4. Disconnect the water supply line and the drain line.

Remove the Old Toilet

Now that the RV toilet is prepared, you can remove it. To do this, you will need to:

1. Remove the nuts that secure the toilet to the floor.
2. Lift the toilet up and out of the way.
3. Disconnect the sewer hose from the bottom of the toilet.

Install the New Toilet

Now that the old toilet is removed, you can install the new toilet. To do this, you will need to:

1. Place the new toilet over the drain flange.
2. Connect the sewer hose to the bottom of the toilet.
3. Secure the toilet to the floor with the nuts that you removed from the old toilet.
4. Connect the water supply line and the drain line.

Test the New Toilet

Once the new toilet is installed, you should test it to make sure that it is working properly. To do this, turn on the water supply to the toilet and flush it. The toilet should fill with water and flush properly.

Changing an RV toilet is a relatively simple task that can be completed in about an hour. By following the steps in this guide, you can easily replace your old toilet with a new one.

Here are some additional tips for changing an RV toilet:

• Make sure that the new toilet is the same size as the old toilet.
• Use plumber’s putty to seal around the base of the toilet.
• Tighten the nuts that secure the toilet to the floor securely.
• Test the new toilet to make sure that it is working properly.

By following these tips, you can easily change your RV toilet and enjoy a new, working toilet in no time.

3. Remove the Old RV Toilet

To remove the old RV toilet, you will need:

• A pair of pliers
• A wrench
• A bucket
• A screwdriver

1. Turn off the water supply to the toilet.
2. Flush the toilet to drain the water from the tank.
3. Remove the toilet seat.
4. Locate the nuts that hold the toilet to the floor. These nuts are typically located on the back of the toilet, near the bottom.
5. Use the pliers to loosen the nuts.
6. Locate the bolts that hold the toilet to the wall. These bolts are typically located on the sides of the toilet, near the top.
7. Use the wrench to loosen the bolts.
8. Carefully lift the toilet out of the RV.
9. Place the toilet in a bucket to catch any remaining water.

4. Install the New RV Toilet

To install the new RV toilet, you will need:

• A new RV toilet
• A new toilet seat
• A pair of pliers
• A wrench
• A screwdriver
• A bucket
• A hose

1. Place the new toilet in the same location as the old toilet.
2. Connect the water supply line to the toilet.
3. Connect the drain line to the toilet.
4. Tighten the nuts and bolts that hold the toilet to the floor and the wall.
5. Replace the toilet seat.
6. Turn on the water supply to the toilet.
7. Flush the toilet to check for leaks.

Changing an RV toilet is a relatively simple task that can be completed in about an hour. By following these steps, you can easily replace your old toilet with a new one.

Q: How often do I need to change my RV toilet?

A: RV toilets typically need to be changed every 3 to 5 years. However, this can vary depending on the usage and maintenance of the toilet. If you notice that the toilet is starting to clog more often, or if the water is not draining properly, it is a good idea to have it replaced sooner.

Q: What tools do I need to change my RV toilet?

A: You will need the following tools to change your RV toilet:

• A screwdriver
• A wrench
• A pair of pliers
• A bucket
• A new toilet
• Plumbing sealant
• Toilet paper

Q: How do I remove the old toilet?

1. Turn off the water supply to the toilet.
2. Flush the toilet to drain all of the water.
3. Remove the toilet seat.
4. Locate the bolts that hold the toilet to the floor.
5. Use a wrench to loosen the bolts.
6. Carefully lift the toilet off of the floor.
7. Remove the old wax ring from the bottom of the toilet.

Q: How do I install the new toilet?

1. Apply a bead of plumber’s sealant around the bottom of the new toilet.
2. Place the toilet on the floor and align the bolts with the holes in the floor.
3. Tighten the bolts until the toilet is secure.
4. Apply a new wax ring to the bottom of the toilet.
5. Connect the water supply to the toilet.
6. Replace the toilet seat.

Q: What are some common problems with RV toilets?

• Clogs: RV toilets are more prone to clogs than traditional toilets because they are smaller and have a shorter drainpipe. Clogs can be caused by a variety of things, including:
• Toilet paper that is too thick or wet
• Feminine hygiene products
• Pet hair
• Foreign objects
• Leaks: Leaks can occur around the base of the toilet or from the water supply line. Leaks can be caused by a variety of things, including:
• Loose bolts
• Damaged seals
• Improper installation
• Running toilets: A running toilet can waste a lot of water and can be a nuisance. Running toilets can be caused by a variety of things, including:
• A stuck flapper valve
• A faulty fill valve
• A leak in the water supply line

Q: How can I prevent problems with my RV toilet?

You can prevent problems with your RV toilet by following these tips:

• Use only toilet paper that is designed for RV toilets.
• Avoid flushing feminine hygiene products, pet hair, or foreign objects down the toilet.
• Check the toilet regularly for clogs and leaks.
• Repair any problems as soon as they occur.

Q: Where can I get help if I need to change my RV toilet?

If you need help changing your RV toilet, you can contact a qualified RV repair technician. You can also find helpful information and tips online.

Changing an RV toilet is a relatively simple task that can be completed in a few hours. However, it is important to follow the proper steps to ensure that the job is done correctly and that the new toilet is installed properly. By following the steps outlined in this guide, you can easily change your RV toilet and have a working toilet in no time.

Here are the key takeaways from this guide:

• Before you begin, make sure you have all of the necessary tools and materials.
• Turn off the water supply to the toilet and flush the toilet to drain the water.
• Remove the old toilet by disconnecting the water supply line, the drain line, and the bolts that hold the toilet to the floor.
• Clean the area where the toilet was installed.
• Position the new toilet and attach it to the floor using the bolts provided.
• Connect the water supply line and the drain line to the new toilet.
• Turn on the water supply and flush the toilet to test it.

By following these steps, you can easily change your RV toilet and have a working toilet in no time.