How to Replace a Roman Tub Faucet | Step-by-Step Guide

How to Change a Roman Tub Faucet

Roman tub faucets are a beautiful and elegant addition to any bathroom, but they can also be a bit tricky to replace. If your Roman tub faucet is leaking or has stopped working properly, you may need to replace it. This guide will walk you through the process of changing a Roman tub faucet, step-by-step.

We’ll cover everything you need to know, from gathering the necessary tools and materials to removing the old faucet and installing the new one. By the end of this guide, you’ll be able to change your Roman tub faucet like a pro.

So if your Roman tub faucet is giving you trouble, don’t despair. Just follow this guide, and you’ll be back in hot water in no time.

Step	Instructions	Image
1	Turn off the water supply to the faucet.
2	Remove the old faucet by unscrewing the nuts that hold it in place.
3	Install the new faucet by screwing it into place.
4	Turn on the water supply to the faucet and test it to make sure it is working properly.

A Roman tub faucet is a type of faucet that is typically found in clawfoot bathtubs. It is characterized by its long, curved spout and its two handles, which are usually located on opposite sides of the faucet. Roman tub faucets are a popular choice for traditional bathrooms, as they add a touch of elegance and sophistication to the overall design.

However, Roman tub faucets can be difficult to replace, as they are often installed in tight spaces. If your Roman tub faucet is leaking or has become damaged, you may need to replace it. This guide will walk you through the process of replacing a Roman tub faucet, step by step.

Gather Your Materials

Before you begin, you will need to gather the following materials:

• Replacement faucet
• Pipe wrench
• Penetrating oil
• Tape measure
• Combination/socket wrench
• Pliers
• Screwdriver
• Bucket
• Towels

Prepare the Tub

The first step is to prepare the tub. This involves turning off the water supply to the tub and draining the tub. To turn off the water supply, locate the shut-off valve near the tub. It is usually a small, round valve with a handle. Turn the handle clockwise to turn off the water supply.

Once the water supply is turned off, you can drain the tub. To do this, open the drain plug in the bottom of the tub. If the drain plug is stuck, you can try using a plunger to loosen it.

Once the tub is drained, you can remove the old faucet. To do this, you will need to remove the two nuts that hold the faucet in place. These nuts are usually located on the back of the faucet. Use a pipe wrench to loosen the nuts. Be careful not to damage the faucet.

Once the nuts are loosened, you can remove the old faucet. To do this, carefully pull the faucet straight up. Be careful not to damage the pipes.

Clean the Area Around the Faucet

Once the old faucet is removed, you will need to clean the area around the faucet. This will help to ensure that the new faucet is installed properly. To clean the area around the faucet, use a damp cloth to wipe away any dirt or debris.

Install the New Faucet

Now it is time to install the new faucet. To do this, you will need to follow the instructions that came with the faucet. Generally, the process involves attaching the faucet to the pipes, tightening the nuts, and turning on the water supply.

Once the new faucet is installed, you can test it to make sure that it is working properly. Turn on the water supply and check for leaks. If there are no leaks, you can enjoy your new faucet!

Replacing a Roman tub faucet is a relatively simple task, but it is important to follow the steps carefully to avoid damaging the faucet or the pipes. If you are not comfortable doing this type of work, you may want to hire a professional plumber to do the job for you.

Here are some additional tips for replacing a Roman tub faucet:

• Make sure that the new faucet is the same size as the old faucet.
• Use a plumber’s putty to seal around the faucet. This will help to prevent leaks.
• Tighten the nuts on the faucet until they are snug, but do not overtighten them. Overtightening the nuts can damage the faucet.
• Test the faucet to make sure that it is working properly.

How To Change A Roman Tub Faucet?

1. Prepare the Workspace

Before you can start changing the faucet, you need to prepare the workspace. This includes gathering the necessary tools and materials, and making sure that the area is clear of debris.

Tools and Materials

• Replacement faucet
• Pipe wrench
• Pliers
• Tape measure
• Combination or socket wrench
• Penetrating oil
• Plumber’s putty
• Rags
• Gloves

Clearing the Area

The first step is to clear the area around the faucet. Remove any furniture or other items that might get in the way. You should also remove the shower curtain and liner, if applicable.

2. Shut Off the Water Supply

The next step is to shut off the water supply to the tub. This is usually done by turning off the main water valve, which is located near the water meter. Once the water is turned off, you can drain the water from the tub by opening the drain plug.

3. Remove the Old Faucet

Now it’s time to remove the old faucet. To do this, you’ll need to first remove the escutcheon, which is the decorative cover that surrounds the faucet. The escutcheon is usually held in place by screws or clips. Once the escutcheon is removed, you can access the faucet itself.

The faucet is held in place by a set of nuts or bolts. You can use a pipe wrench to loosen these nuts or bolts. Be careful not to damage the threads on the faucet. Once the nuts or bolts are loosened, you can remove the faucet from the tub.

4. Install the New Faucet

Now it’s time to install the new faucet. To do this, you’ll need to first apply a thin coat of plumber’s putty to the threads of the new faucet. This will help to create a watertight seal.

Next, insert the new faucet into the hole in the tub. Hand-tighten the faucet until it is snug. Then, use a pipe wrench to tighten the faucet until it is secure.

Once the faucet is installed, you can connect the water supply lines to the new faucet. Make sure that the water supply lines are properly tightened.

5. Turn on the Water Supply

Now it’s time to turn on the water supply to the tub and test the faucet. Make sure that the faucet is working properly and that there are no leaks.

6. Clean Up

Finally, you can clean up the area around the faucet. Wipe down the area with a damp cloth. Dispose of any trash.

Changing a Roman tub faucet is a relatively simple task that can be completed by most homeowners. By following these steps, you can easily replace your old faucet with a new one.

How do I know if my Roman tub faucet needs to be replaced?

There are a few signs that your Roman tub faucet may need to be replaced. These include:

• The faucet is leaking.
• The faucet is dripping.
• The faucet is not turning on or off properly.
• The faucet is not mixing hot and cold water properly.
• The faucet is making a rattling or gurgling noise.

If you notice any of these signs, it is a good idea to have your faucet inspected by a plumber to determine if it needs to be replaced.

How do I remove a Roman tub faucet?

To remove a Roman tub faucet, you will need the following tools:

• A wrench
• A screwdriver
• A plumber’s putty knife
• A bucket
• A rag

1. Turn off the water supply to the faucet.
2. Remove the faucet handles.
3. Remove the faucet escutcheon.
4. Loosen the nuts that hold the faucet to the sink.
5. Remove the faucet from the sink.
6. Clean the area where the faucet was installed.
7. Apply plumber’s putty to the threads of the new faucet.
8. Install the new faucet.
9. Tighten the nuts that hold the faucet to the sink.
10. Turn on the water supply to the faucet.
11. Test the faucet to make sure it is working properly.

How do I install a Roman tub faucet?

To install a Roman tub faucet, you will need the following tools:

• A wrench
• A screwdriver
• A plumber’s putty knife
• A bucket
• A rag

1. Clean the area where the faucet will be installed.
2. Apply plumber’s putty to the threads of the new faucet.
3. Install the new faucet.
4. Tighten the nuts that hold the faucet to the sink.
5. Turn on the water supply to the faucet.
6. Test the faucet to make sure it is working properly.

What are the different types of Roman tub faucets?

There are three main types of Roman tub faucets:

• Single-handle faucets: These faucets have a single handle that controls both the hot and cold water.
• Two-handle faucets: These faucets have two handles, one for the hot water and one for the cold water.
• Thermostatic faucets: These faucets automatically mix hot and cold water to the desired temperature.

Which type of Roman tub faucet is best for me?

The best type of Roman tub faucet for you depends on your personal preferences and needs. Single-handle faucets are the most convenient, while two-handle faucets offer more control over the water temperature. Thermostatic faucets are the most precise, but they are also the most expensive.

How much does it cost to replace a Roman tub faucet?

The cost of replacing a Roman tub faucet varies depending on the type of faucet and the labor costs in your area. Single-handle faucets typically cost between $50 and $100, while two-handle faucets cost between $100 and $200. Thermostatic faucets can cost anywhere from $200 to $500. The labor costs to replace a faucet typically range from $50 to $100.

How long does it take to replace a Roman tub faucet?

The amount of time it takes to replace a Roman tub faucet depends on the type of faucet and the skill of the plumber. Single-handle faucets can typically be replaced in about 30 minutes, while two-handle faucets and thermostatic faucets can take up to an hour.

Changing a Roman tub faucet is a relatively simple task that can be completed in a few hours. By following the steps in this guide, you can easily replace your old faucet with a new one that will improve the look and function of your bathroom.

Here are the key takeaways from this guide:

• Before you begin, make sure you have the necessary tools and materials.
• Turn off the water supply to the faucet and drain the tub.
• Remove the old faucet by unscrewing the nuts that hold it in place.
• Install the new faucet by following the manufacturer’s instructions.
• Turn on the water supply and test the faucet to make sure it is working properly.

By following these steps, you can easily change your Roman tub faucet and give your bathroom a new look.