How to Change a Camper Toilet: A Step-by-Step Guide

AvatarByLiana Farrell Toilet Queries

How To Change A Camper Toilet?

Camper toilets are a necessity for those who enjoy spending time outdoors, but they can also be a hassle to maintain. If your camper toilet is starting to smell or not flushing properly, it may be time for a new one. Changing a camper toilet is a relatively simple task that can be completed in just a few steps. In this article, we will walk you through the process of changing a camper toilet, so you can get back to enjoying your time in the great outdoors.

What You Will Need

Before you begin, gather the following materials:

  • New camper toilet
  • Plumbing tape
  • Pliers
  • Wrench
  • Bucket
  • Gloves
  • Safety glasses

Step-by-Step Instructions

1. Turn off the water supply to the camper toilet. This can usually be done by turning a valve located under the sink or near the toilet.
2. Disconnect the water line from the toilet. There will be a hose connecting the toilet to the water supply. Use a wrench to loosen the nut on the end of the hose and disconnect it from the toilet.
3. Remove the old toilet. There will be two bolts located on either side of the toilet. Use a wrench to loosen the bolts and remove the toilet from the camper.
4. Install the new toilet. Place the new toilet in the same location as the old toilet. Secure the toilet to the floor with the two bolts.
5. Reconnect the water line to the toilet. Connect the hose from the water supply to the new toilet. Tighten the nut on the end of the hose to secure it in place.
6. Turn on the water supply to the camper toilet. Flush the toilet to make sure that it is working properly.

Tips

  • If you are not comfortable working with plumbing, you may want to hire a professional to replace your camper toilet.
  • Make sure to wear gloves and safety glasses when working on your camper toilet.
  • Be careful not to spill any water on the floor when you are disconnecting the water line from the toilet.
  • Flush the toilet several times after you have installed the new toilet to make sure that it is working properly.

    Step Instructions Image
    1 Turn off the water supply to the toilet.
    2 Remove the toilet seat.
    3 Disconnect the water line and the waste line from the toilet.
    4 Remove the toilet from the base.
    5 Install the new toilet in the same way you removed the old one.
    6 Reconnect the water line and the waste line to the toilet.
    7 Turn on the water supply to the toilet.

    A camper toilet is a small, portable toilet that is designed for use in recreational vehicles. Camper toilets are typically made of plastic or fiberglass and are self-contained, meaning that they do not require a connection to a sewer system. This makes them ideal for use in remote areas where there is no access to plumbing.

    However, camper toilets can also be a bit of a pain to replace. They are often heavy and awkward to maneuver, and the process of removing and installing a new toilet can be time-consuming and messy.

    In this guide, we will walk you through the process of replacing a camper toilet step-by-step. We will provide you with detailed instructions on how to gather the necessary tools and materials, prepare the camper for the toilet replacement, and remove and install the new toilet.

    By following these instructions, you can easily replace your camper toilet without having to hire a professional.

    Gather the Required Tools and Materials

    The following tools and materials are required to replace a camper toilet:

    • Camper toilet
    • New toilet
    • Tape measure
    • Combination/socket wrench
    • Pliers
    • Penetrating oil
    • New wax ring
    • Toilet flange bolts
    • Silicone sealant
    • Rags
    • Safety glasses

    Prepare the Camper for the Toilet Replacement

    Before you can begin replacing the toilet, you will need to prepare the camper for the project. This involves turning off the water supply to the toilet, draining the water from the tank, and removing the toilet seat.

    To turn off the water supply to the toilet, locate the water valve under the sink or near the toilet. Turn the valve clockwise until it is completely closed.

    To drain the water from the tank, flush the toilet and then open the drain valve located at the bottom of the tank. Allow all of the water to drain out of the tank.

    To remove the toilet seat, locate the two bolts that hold the seat to the toilet bowl. Loosen the bolts with a screwdriver or pliers and then remove the seat.

    Remove the Old Toilet

    Now that you have prepared the camper for the toilet replacement, you can begin removing the old toilet. To do this, you will need to remove the bolts that hold the toilet to the floor.

    Locate the four bolts that hold the toilet to the floor. These bolts are typically located in the corners of the toilet bowl. Loosen the bolts with a combination/socket wrench and then remove them.

    Once the bolts are removed, you can lift the toilet out of the camper. Be careful not to drop the toilet, as it is heavy and can be damaged if dropped.

    Install the New Toilet

    Now that you have removed the old toilet, you can install the new toilet. To do this, you will need to place the new toilet in the same location as the old toilet.

    Align the holes in the toilet bowl with the bolts in the floor. Insert the bolts through the holes in the toilet bowl and then tighten them with a combination/socket wrench.

    Once the bolts are tightened, you can apply a new wax ring to the bottom of the toilet. The wax ring will create a seal between the toilet and the floor, preventing leaks.

    Next, you will need to install the toilet seat. To do this, align the holes in the toilet seat with the bolts in the toilet bowl. Insert the bolts through the holes in the seat and then tighten them with a screwdriver or pliers.

    Finally, you can turn on the water supply to the toilet and flush the toilet to check for leaks.

    Replacing a camper toilet is a relatively simple task that can be completed in a few hours. By following these instructions, you can easily replace your camper toilet without having to hire a professional.

    3. Install the New Toilet

    To install the new toilet, you will need the following materials:

    • New toilet
    • New toilet flange
    • Silicone sealant
    • Bolts
    • Washers
    • Pliers
    • Tape measure
    • Level

    Step 1: Apply a bead of silicone sealant around the edge of the new toilet flange.

    The toilet flange is the metal ring that the toilet sits on. It is important to apply a bead of silicone sealant around the edge of the flange to create a watertight seal.

    Step 2: Place the new toilet flange on the floor of the camper.

    The toilet flange should be placed in the center of the hole in the floor of the camper. Make sure that the flange is level.

    Step 3: Lower the new toilet onto the flange.

    The toilet should be lowered onto the flange so that the bolts in the toilet align with the holes in the flange.

    Step 4: Insert the bolts through the holes in the toilet and tighten them until the toilet is secure.

    The bolts should be tightened until the toilet is secure and will not move.

    Step 5: Connect the water supply line to the new toilet.

    The water supply line should be connected to the new toilet using a compression fitting. Make sure that the water supply line is tight and will not leak.

    Step 6: Connect the toilet drain line to the new toilet.

    The toilet drain line should be connected to the new toilet using a wax ring. Make sure that the toilet drain line is tight and will not leak.

    Step 7: Test the New Toilet

    Once the new toilet is installed, you should test it to make sure that it is working properly. Turn on the water supply to the camper toilet and flush the toilet. Check for leaks around the toilet and the toilet flange.

    Troubleshooting

    If you have any problems with the new toilet, you can troubleshoot the problem by following these steps:

    • Check the water supply line to make sure that it is turned on and that there are no leaks.
    • Check the toilet drain line to make sure that it is connected properly and that there are no leaks.
    • Check the toilet flange to make sure that it is installed correctly and that there are no leaks.
    • If you are still having problems, you can call a plumber for help.

    4. Test the New Toilet

    To test the new toilet, you will need to do the following:

    • Turn on the water supply to the camper toilet.
    • Flush the toilet.
    • Check for leaks around the toilet and the toilet flange.

    If the toilet is working properly, you should not see any leaks. The water should flow smoothly into the toilet and the toilet should flush completely.

    If you do see any leaks, you will need to troubleshoot the problem as described in the previous section.

    Changing a camper toilet is a relatively simple task that can be completed in a few hours. By following the steps in this guide, you can easily replace your old toilet with a new one.

    How to Change a Camper Toilet?

    Q: What tools do I need to change a camper toilet?

    A: You will need the following tools:

    • A screwdriver
    • A wrench
    • A pair of pliers
    • A bucket
    • A hose
    • A new toilet

    Q: How do I remove the old toilet?

    A: 1. Turn off the water supply to the toilet.
    2. Flush the toilet to empty the tank.
    3. Remove the toilet seat.
    4. Locate the bolts that hold the toilet to the floor.
    5. Use a wrench to loosen the bolts.
    6. Carefully lift the toilet off the floor.
    7. Disconnect the water line and the sewer line.

    Q: How do I install the new toilet?

    A: 1. Place the new toilet on the floor in the same location as the old toilet.
    2. Connect the water line and the sewer line.
    3. Tighten the bolts that hold the toilet to the floor.
    4. Replace the toilet seat.
    5. Turn on the water supply to the toilet.
    6. Flush the toilet to check for leaks.

    Q: What are some common problems with camper toilets?

    A: Some common problems with camper toilets include:

    • Leaks
    • Clogged drains
    • Sagging seats
    • Broken flush mechanisms

    Q: How can I prevent problems with my camper toilet?

    A: You can prevent problems with your camper toilet by:

    • Keeping the toilet clean and free of debris.
    • Replacing the toilet seat regularly.
    • Repairing any leaks or clogs as soon as they occur.
    • Using a toilet treatment to keep the tank clean and free of bacteria.

    Q: Where can I find replacement parts for my camper toilet?

    A: You can find replacement parts for your camper toilet at most RV dealerships and parts stores. You can also order parts online from a variety of retailers.

    Changing a camper toilet is a relatively simple task, but it is important to follow the steps carefully to avoid damaging the toilet or the camper. By following the steps outlined in this article, you can easily and safely change your camper toilet in no time.

    Here are the key takeaways from this article:

    • Before you begin, make sure you have the necessary tools and materials.
    • Turn off the water supply to the toilet and flush the toilet to drain the water.
    • Remove the old toilet by disconnecting the water supply line, the drain hose, and the bolts that hold the toilet to the floor.
    • Clean the toilet flange and the area around it.
    • Position the new toilet over the flange and attach the bolts.
    • Connect the water supply line and the drain hose.
    • Turn on the water supply and flush the toilet to test it.

    By following these steps, you can easily and safely change your camper toilet in no time.

    Author Profile

    Liana Farrell
    Liana Farrell
    Liana Farrell is the owner of toiletty.com. She is a mom of two and is very passionate about home improvement.

    Liana has ten years of home improvement experience, and in her own words, she said: “I love improving the home, and I’m very passionate about keeping the home in the best possible condition. I love it!”

    Liana Farrell balances beauty and functionality when she goes about her home improvement jobs.