How To Add A Shower Head To A Bathtub?

AvatarByLiana Farrell Bathtub Queries

How to Add a Shower Head to a Bathtub

A bathtub shower head is a great way to add convenience and versatility to your bathroom. With a bathtub shower head, you can enjoy a relaxing shower without having to step out of the tub. You can also use a bathtub shower head to rinse off after a bath or to wash your hair.

Adding a shower head to a bathtub is a relatively simple project that can be completed in just a few steps. In this article, we will walk you through the process of adding a shower head to a bathtub, step-by-step.

We’ll start by discussing the different types of shower heads available and how to choose the right one for your needs. Then, we’ll show you how to install a shower head on a bathtub, both with and without a diverter valve.

By the end of this article, you’ll be able to add a shower head to your bathtub with confidence.

How To Add A Shower Head To A Bathtub?

| Step | Task | Tools |
|—|—|—|
| 1 | Remove the old shower head | Pliers, screwdriver |
| 2 | Install the new shower head | Tape measure, level, plumber’s putty, new shower head |
| 3 | Test the new shower head | Turn on the water and adjust the temperature |

A shower head is an essential part of any bathroom, and it can be a simple DIY project to install a new one. This guide will walk you through the steps of adding a shower head to a bathtub, from gathering the necessary tools and materials to installing the shower head itself.

Tools and Materials Needed

  • Shower head
  • Shower arm
  • Pipe wrench
  • Adjustable wrench
  • Tape measure
  • Level
  • Plumber’s putty
  • Silicone sealant
  • Screwdriver
  • Drill
  • Hole saw

Steps for Installing a Shower Head

1. Gather your tools and materials. Make sure you have all of the necessary tools and materials on hand before you begin the installation process.
2. Turn off the water supply to the bathtub. This is an important safety precaution to take before you begin working on the plumbing.
3. Locate the hot and cold water supply lines to the bathtub. These lines are typically located behind the wall behind the bathtub. You may need to remove a panel or some drywall to access them.
4. Disconnect the old shower head. Use a pipe wrench to loosen the nuts that connect the shower head to the hot and cold water supply lines. Be careful not to damage the pipes.
5. Install the new shower arm. The shower arm is the pipe that connects the shower head to the water supply lines. It is typically made of metal or plastic. Slide the shower arm into the hole in the wall where the old shower head was located. Secure the shower arm to the wall with the nuts that you removed from the old shower head.
6. Install the shower head. Slide the shower head onto the shower arm. Secure the shower head to the shower arm with the screws that came with the shower head.
7. Turn on the water supply to the bathtub. Test the shower head to make sure that it is working properly.
8. Apply plumber’s putty and silicone sealant around the shower head. This will help to seal the shower head to the wall and prevent leaks.
9. Enjoy your new shower head!

How to Add a Shower Head to a Bathtub

Adding a shower head to a bathtub is a relatively simple project that can be completed in a few hours. With the right tools and materials, you can have a new shower head installed in no time.

Materials

  • New shower head
  • Shower arm
  • Shower diverter (optional)
  • Pliers
  • Tape measure
  • Combination or adjustable wrench
  • Penetrating oil
  • Plumber’s putty
  • Caulk
  • Screwdriver
  • Hacksaw
  • Safety glasses
  • Work gloves

Steps

1. Turn off the water supply to the bathtub. This can usually be done by turning a valve located near the bathtub. Once the water is turned off, open the faucet to drain any remaining water from the pipes.
2. Remove the old shower head by unscrewing it from the shower arm. If the shower head is stuck, you may need to apply penetrating oil to the threads and let it sit for a few minutes before trying to unscrew it. Once the shower head is removed, you can discard it.
3. Install the new shower arm. The shower arm is the pipe that connects the shower head to the water supply. It is typically made of brass or copper and has a threaded end that screws into the bathtub spout. To install the shower arm, first apply a thin layer of plumber’s putty to the threads. Then, insert the shower arm into the spout and tighten it with a wrench.
4. Install the shower head. The shower head is typically made of plastic or metal and has a threaded end that screws onto the shower arm. To install the shower head, first apply a thin layer of plumber’s putty to the threads. Then, insert the shower head onto the shower arm and tighten it with a wrench.
5. Install the shower diverter (optional). A shower diverter allows you to switch between the shower head and the bathtub faucet. To install the shower diverter, first remove the old diverter (if there is one). Then, insert the new diverter into the shower arm and tighten it with a wrench.
6. Turn on the water supply to the bathtub and test the shower head. Make sure that the shower head is properly installed and that the water is flowing freely. If there are any leaks, you may need to tighten the connections or apply more plumber’s putty.

Adding a shower head to a bathtub is a relatively simple project that can be completed in a few hours. With the right tools and materials, you can have a new shower head installed in no time.

Here are some additional tips for installing a shower head:

  • Make sure that the shower head is compatible with the shower arm.
  • Use a level to make sure that the shower head is installed straight.
  • Apply a thin layer of plumber’s putty to the threads of the shower head and shower arm to prevent leaks.
  • Tighten the connections with a wrench until they are snug, but do not overtighten them.
  • Test the shower head to make sure that it is properly installed and that the water is flowing freely.

    How do I add a shower head to my bathtub?

1. Turn off the water supply to the bathtub. This is usually located at the main water valve for your home.
2. Drain the water from the bathtub. You can do this by opening the drain plug or by using a plunger.
3. Remove the old shower head. There are usually two screws that hold the shower head in place. Unscrew these screws and remove the shower head.
4. Install the new shower head. Make sure that the new shower head is compatible with your bathtub. Attach the shower head to the bathtub using the screws that came with the new shower head.
5. Turn on the water supply to the bathtub and test the shower head. Make sure that the shower head is working properly and that there are no leaks.

What size shower head do I need?

The size of the shower head you need will depend on the size of your bathtub. A good rule of thumb is to choose a shower head that is about the same size as the width of your bathtub.

How do I install a handheld shower head?

To install a handheld shower head, you will need:

  • A handheld shower head
  • A shower arm
  • A shower hose
  • A screwdriver

1. Turn off the water supply to the bathtub. This is usually located at the main water valve for your home.
2. Drain the water from the bathtub. You can do this by opening the drain plug or by using a plunger.
3. Install the shower arm. The shower arm should be installed on the side of the bathtub, near the faucet. The shower arm should be installed so that it is level and secure.
4. Attach the shower hose to the shower arm. The shower hose should be long enough to reach from the shower arm to the handheld shower head.
5. Attach the handheld shower head to the shower hose. The handheld shower head should be securely attached to the shower hose.
6. Turn on the water supply to the bathtub and test the shower head. Make sure that the shower head is working properly and that there are no leaks.

What is the best type of shower head?

There are many different types of shower heads available on the market, each with its own advantages and disadvantages. The best type of shower head for you will depend on your personal preferences and needs.

Some of the factors you may want to consider when choosing a shower head include:

  • The size of the shower head
  • The type of water flow
  • The water pressure
  • The features of the shower head

How do I clean a shower head?

To clean a shower head, you will need:

  • A vinegar and water solution
  • A toothbrush
  • A cloth

1. Turn off the water supply to the bathtub. This is usually located at the main water valve for your home.
2. Drain the water from the bathtub. You can do this by opening the drain plug or by using a plunger.
3. Fill a bucket with a vinegar and water solution. The solution should be equal parts vinegar and water.
4. Dip the toothbrush into the vinegar and water solution.
5. Scrub the shower head with the toothbrush. Be sure to clean all of the holes in the shower head.
6. Rinse the shower head with water.
7. Dry the shower head with a cloth.

How do I prevent a shower head from clogging?

There are a few things you can do to prevent a shower head from clogging:

  • Use a water softener. A water softener can help to reduce the amount of minerals in your water, which can help to prevent the shower head from clogging.
  • Use a shower filter. A shower filter can help to remove dirt, debris, and other particles from your water, which can help to prevent the shower head from clogging.
  • Clean the shower head regularly. Cleaning the shower head regularly can help to remove any build-up of dirt, debris, and other particles, which can help to prevent the shower head from clogging.

    In this blog post, we have discussed how to add a shower head to a bathtub. We have covered the steps involved in the process, as well as some of the things you need to keep in mind. We hope that this information has been helpful and that you are now able to add a shower head to your bathtub with confidence.

Here are some key takeaways from the blog post:

  • Before you begin, make sure that you have the necessary tools and materials.
  • It is important to measure the distance between the bathtub and the shower head to ensure that the shower head is installed at the correct height.
  • You will need to turn off the water supply to the bathtub before you begin the installation process.
  • Once the shower head is installed, you will need to test it to make sure that it is working properly.

We hope that you found this blog post helpful. If you have any questions, please feel free to leave a comment below.

Author Profile

Liana Farrell
Liana Farrell
Liana Farrell is the owner of toiletty.com. She is a mom of two and is very passionate about home improvement.

Liana has ten years of home improvement experience, and in her own words, she said: “I love improving the home, and I’m very passionate about keeping the home in the best possible condition. I love it!”

Liana Farrell balances beauty and functionality when she goes about her home improvement jobs.