How Much Does a Toilet Fill Valve Cost?

AvatarByLiana Farrell Toilet Queries

How Much is a Fill Valve for a Toilet?

Your toilet’s fill valve is a small but important part that helps to keep your toilet running smoothly. It’s responsible for regulating the amount of water that flows into the tank, and it can also help to prevent leaks. If your fill valve is damaged or malfunctioning, it can cause a number of problems, including a running toilet, a toilet that doesn’t flush properly, and water damage.

So, how much does a fill valve for a toilet cost? The answer to that question depends on a few factors, including the type of fill valve you need, the brand you choose, and where you buy it. In general, you can expect to pay anywhere from $10 to $50 for a new fill valve.

In this article, we’ll take a closer look at fill valves for toilets, including the different types of fill valves available, how much they cost, and how to install a new fill valve. We’ll also provide some tips on how to prevent fill valve problems in the future.

Brand Price Features
American Standard $10-$20 Made from durable materials, easy to install
KOHLER $15-$30 Water-saving, quiet, long-lasting
Delta $20-$40 Self-priming, leak-proof, 10-year warranty

How Much Is A Fill Valve For A Toilet?

Types of Fill Valves

There are four main types of fill valves used in toilets:

  • Ballcock fill valves
  • Float fill valves
  • Diaphragm fill valves
  • Pressure-assisted fill valves

Ballcock Fill Valves

Ballcock fill valves are the oldest and most common type of fill valve. They are simple and reliable, but they can be noisy and may require more frequent maintenance than other types of fill valves.

Ballcock fill valves work by using a float to control the flow of water into the toilet tank. The float is attached to a lever that opens and closes the valve. As the water level in the tank rises, the float rises with it. When the float reaches a certain level, it triggers the lever to close the valve, cutting off the flow of water.

Ballcock fill valves are typically made of plastic or brass. They are available in a variety of sizes to fit different toilet tanks.

Float Fill Valves

Float fill valves are similar to ballcock fill valves, but they use a different mechanism to control the flow of water. Float fill valves have a float that sits in the water in the toilet tank. As the water level rises, the float rises with it. When the float reaches a certain level, it triggers a lever to open the valve, allowing water to flow into the tank.

Float fill valves are typically made of plastic or brass. They are available in a variety of sizes to fit different toilet tanks.

Diaphragm Fill Valves

Diaphragm fill valves are a newer type of fill valve that is becoming increasingly popular. They are more efficient and quieter than ballcock and float fill valves, and they require less maintenance.

Diaphragm fill valves work by using a diaphragm to control the flow of water. The diaphragm is a flexible membrane that is attached to a valve seat. When the water level in the tank rises, the diaphragm flexes and opens the valve, allowing water to flow into the tank.

Diaphragm fill valves are typically made of plastic or rubber. They are available in a variety of sizes to fit different toilet tanks.

Pressure-Assisted Fill Valves

Pressure-assisted fill valves are the most efficient type of fill valve. They use a pressurized air chamber to force water into the toilet tank. This allows the fill valve to open and close more quickly, which reduces the amount of water wasted.

Pressure-assisted fill valves are typically made of plastic or brass. They are available in a variety of sizes to fit different toilet tanks.

Cost of Fill Valves

The cost of a fill valve varies depending on the type of valve, the size of the valve, and the brand of the valve. Ballcock fill valves are the least expensive, typically costing around $10-$20. Float fill valves are slightly more expensive, typically costing around $20-$30. Diaphragm fill valves are the most expensive, typically costing around $30-$40. Pressure-assisted fill valves are the most expensive, typically costing around $40-$50.

The cost of a fill valve can also be affected by the warranty. Some fill valves come with a warranty, while others do not. If you are concerned about the longevity of your fill valve, you may want to choose a valve with a warranty.

Average Cost of a Fill Valve

The average cost of a fill valve is around $25. This includes both ballcock fill valves and float fill valves. Diaphragm fill valves and pressure-assisted fill valves are typically more expensive, but they are also more efficient and require less maintenance.

Factors Affecting the Cost of a Fill Valve

The following factors can affect the cost of a fill valve:

  • Type of valve: Ballcock fill valves are the least expensive, while diaphragm fill valves and pressure-assisted fill valves are the most expensive.
  • Size of the valve: The size of the valve is determined by the size of the toilet tank. Larger toilet tanks require larger fill valves.
  • Brand of the valve: The brand of the valve can also affect the price. Some brands are more expensive than others.
  • Warranty: Some fill valves come with a warranty, while others do not. If you are concerned about the longevity of your fill valve, you may want to choose a valve with a warranty.

Fill valves are an important part of your toilet. They ensure that your toilet has a constant supply of water and that

How Much Is a Fill Valve for a Toilet?

The average cost of a toilet fill valve is between $10 and $30. However, the price can vary depending on the brand, style, and features of the valve.

Here is a breakdown of the average cost of different types of toilet fill valves:

  • Mechanical fill valves: These are the most basic type of fill valves and are typically the least expensive. They typically cost between $10 and $20.
  • Electric fill valves: These fill valves are more advanced than mechanical fill valves and can be controlled with a timer or remote control. They typically cost between $20 and $30.
  • Smart fill valves: These fill valves are the most advanced type of fill valves and can be connected to your home’s Wi-Fi network. They typically cost between $30 and $50.

In addition to the base price of the fill valve, you may also need to factor in the cost of installation. If you are not comfortable installing the fill valve yourself, you can expect to pay a plumber between $50 and $100 to install the valve for you.

How to Choose a Fill Valve

When choosing a fill valve for your toilet, there are a few factors you should consider:

  • The type of toilet: The type of toilet you have will determine the type of fill valve you need. Most toilets use a standard 1.6-gallon fill valve, but some older toilets may use a 3.5-gallon fill valve.
  • The style of the fill valve: There are two main styles of fill valves: mechanical and electric. Mechanical fill valves are the most basic type and are typically the least expensive. Electric fill valves are more advanced and can be controlled with a timer or remote control.
  • The features of the fill valve: Some fill valves come with additional features, such as a leak detector or a water-saving mechanism. If you are looking for a fill valve with these features, you can expect to pay more.

Here are a few tips for choosing a fill valve:

  • Do your research: Before you buy a fill valve, do some research to learn about the different types of valves and their features. This will help you make an informed decision about which valve is right for you.
  • Consider your budget: The price of a fill valve can vary significantly, so it’s important to set a budget before you start shopping.
  • Read reviews: Read reviews of different fill valves to see what other people have to say about them. This can help you get a better idea of how well the valve performs and whether it’s worth the price.

How to Install a Fill Valve

Installing a toilet fill valve is a relatively simple task that can be completed in about 30 minutes. However, if you are not comfortable working with plumbing, you may want to hire a plumber to do the job for you.

Here are the steps on how to install a fill valve:

1. Turn off the water supply to the toilet. Locate the water supply valve under the sink or behind the toilet. Turn the valve clockwise to turn off the water.
2. Remove the old fill valve. There are two main types of fill valves: mechanical and electric. Mechanical fill valves are typically held in place by a nut or clip. Electric fill valves are typically held in place by a screw.

For a mechanical fill valve:

  • Use a wrench to loosen the nut or clip that holds the fill valve in place.
  • Pull the fill valve out of the toilet tank.

For an electric fill valve:

  • Use a screwdriver to loosen the screw that holds the fill valve in place.
  • Pull the fill valve out of the toilet tank.

3. Install the new fill valve. Before you install the new fill valve, make sure that the rubber gasket is in good condition. If the gasket is damaged, replace it with a new one.

For a mechanical fill valve:

  • Apply a thin coat of plumber’s grease to the rubber gasket.
  • Insert the fill valve into the toilet tank.
  • Hand-tighten the nut or clip that holds the fill valve in place.

For an electric fill valve:

  • Apply a thin coat of plumber’s grease to the rubber gasket.
  • Insert the fill valve into the toilet tank.
  • Hand-tighten the screw that holds the fill valve in place.

4. Turn on the water supply to the toilet. Turn the water supply valve

How much does a fill valve for a toilet cost?

The average cost of a toilet fill valve is between $10 and $30. However, the price can vary depending on the brand, type, and features of the valve.

What are the different types of fill valves?

There are two main types of toilet fill valves: gravity and pressure. Gravity fill valves are the most common type and use the force of gravity to fill the toilet tank. Pressure fill valves use a small diaphragm to pressurize water and force it into the tank.

What are the features of a good fill valve?

A good fill valve should be durable, easy to install, and leak-proof. Some features to look for include a nylon flapper, a stainless steel ball float, and a 1/4-turn shutoff valve.

How do I install a toilet fill valve?

Installing a toilet fill valve is a relatively simple task that can be completed in about 30 minutes. To install a new fill valve, you will need to:

1. Turn off the water supply to the toilet.
2. Remove the old fill valve.
3. Install the new fill valve.
4. Turn on the water supply to the toilet.

How do I troubleshoot a leaking fill valve?

If your toilet fill valve is leaking, there are a few things you can check:

1. Make sure the fill valve is properly installed.
2. Check the flapper for damage or wear.
3. Check the ball float for damage or debris.
4. Check the water supply line for leaks.

If you are unable to troubleshoot the leak yourself, you may need to call a plumber.

How can I prevent a toilet fill valve from leaking?

There are a few things you can do to prevent a toilet fill valve from leaking:

1. Use a high-quality fill valve.
2. Install the fill valve correctly.
3. Keep the flapper clean and free of debris.
4. Check the fill valve regularly for leaks.

In this article, we have discussed the different types of fill valves, how to choose the right one for your toilet, and how to install a new fill valve. We have also provided a price range for each type of fill valve.

We hope this information has been helpful. If you have any further questions, please do not hesitate to contact us.

Here are some key takeaways from this article:

  • There are two main types of fill valves: ball valves and flapper valves.
  • Ball valves are more durable and reliable than flapper valves, but they are also more expensive.
  • Flapper valves are less expensive than ball valves, but they are not as durable and reliable.
  • The price of a fill valve can range from \$10 to \$50, depending on the type and brand.
  • The best way to choose a fill valve is to match the type of valve to the type of toilet.
  • Installing a new fill valve is a relatively simple task that can be completed in about 30 minutes.

Author Profile

Liana Farrell
Liana Farrell
Liana Farrell is the owner of toiletty.com. She is a mom of two and is very passionate about home improvement.

Liana has ten years of home improvement experience, and in her own words, she said: “I love improving the home, and I’m very passionate about keeping the home in the best possible condition. I love it!”

Liana Farrell balances beauty and functionality when she goes about her home improvement jobs.