How Much Does It Cost To Replace A Toilet?

AvatarByLiana Farrell Toilet Queries

How Much Does It Cost to Replace a Toilet?

Your toilet is one of the most important fixtures in your home, and when it breaks, it can be a major inconvenience. But how much does it cost to replace a toilet? The answer depends on a number of factors, including the type of toilet you choose, the cost of labor, and the location of your home.

In this article, we’ll take a closer look at the cost of replacing a toilet, and we’ll provide tips on how to get the best possible price. We’ll also discuss some of the factors you should consider when choosing a new toilet.

So if you’re thinking about replacing your toilet, read on for all the information you need to know.

Cost Parts Labor
$100$300 Toilet bowl, tank, seat, and hardware $100$200
$200$600 Water-saving toilet with dual flush $200$400
$500$1,000 Smart toilet with heated seat, bidet, and air dryer $400$600

How Much Does It Cost To Replace A Toilet?

Factors That Affect the Cost of Replacing a Toilet

The cost of replacing a toilet can vary depending on a number of factors, including:

  • The type of toilet. The type of toilet you choose will have a significant impact on the overall cost. Standard toilets typically cost between \$200 and \$400, while high-end toilets can cost upwards of \$1,000.
  • The size of the toilet. The size of the toilet will also affect the cost. Standard toilets are typically 12 inches wide and 28 inches deep, while elongated toilets are 14 inches wide and 30 inches deep. Elongated toilets typically cost more than standard toilets.
  • The materials used in the toilet. The materials used in the toilet can also affect the cost. Toilets are typically made from porcelain, but they can also be made from other materials, such as stainless steel or fiberglass. Toilets made from more expensive materials will typically cost more than toilets made from less expensive materials.
  • The installation costs. The cost of installing a toilet can vary depending on the type of toilet you choose and the complexity of the installation. The average cost of installing a toilet is between \$100 and \$200, but it can be more expensive if you need to remove an old toilet or if you have difficult plumbing.

How to Get the Best Price for a Toilet

There are a few things you can do to get the best price for a toilet:

  • Compare prices from multiple retailers. The best way to get the best price for a toilet is to compare prices from multiple retailers. You can compare prices online, in-store, or by calling around.
  • Shop around for discounts and rebates. Many retailers offer discounts and rebates on toilets. Be sure to ask about any discounts or rebates that are available before you make a purchase.
  • Consider buying a toilet on sale. Toilets are often on sale during certain times of the year, such as Black Friday or Presidents’ Day. Be sure to check for sales before you make a purchase.
  • Ask for quotes from local plumbers. If you need to have a toilet installed, you can get quotes from local plumbers. This will help you compare the cost of installation and make sure you’re getting a fair price.

The cost of replacing a toilet can vary depending on a number of factors. By considering the factors listed above, you can get the best price for a toilet that meets your needs.

How Much Does It Cost To Replace A Toilet?

The average cost to replace a toilet is between \$200 and \$800. The total cost will vary depending on the type of toilet you choose, the cost of labor, and the location of your home.

Factors that Affect the Cost of a Toilet Replacement

The following factors will affect the cost of replacing a toilet:

  • Type of toilet: The type of toilet you choose will be the biggest factor in determining the total cost. Standard toilets cost between \$200 and \$400, while high-efficiency toilets (HETs) can cost between \$400 and \$800.
  • Cost of labor: The cost of labor will vary depending on the location of your home and the complexity of the installation. In general, you can expect to pay between \$100 and \$200 for labor.
  • Location of your home: The cost of materials and labor will be higher in urban areas than in rural areas.

How to DIY a Toilet Replacement

If you’re handy and have some basic DIY skills, you may be able to replace your toilet yourself. Here are the steps involved in a DIY toilet replacement:

1. Gather the necessary tools and materials. You will need the following tools and materials:

  • A plunger
  • A hacksaw
  • A screwdriver
  • A wrench
  • A bucket
  • A new toilet
  • Wax ring
  • Plumbing tape
  • Toilet bolts
  • P-trap
  • Water supply line

2. Turn off the water supply to the toilet. The water supply to the toilet is usually located behind the toilet. Turn off the valve and flush the toilet to drain the water from the tank.

3. Remove the old toilet. The next step is to remove the old toilet. To do this, you will need to disconnect the water supply line, the toilet bolts, and the P-trap.

  • To disconnect the water supply line, turn off the valve and unscrew the nut that connects the water supply line to the toilet.
  • To disconnect the toilet bolts, unscrew the two bolts that hold the toilet to the floor.
  • To disconnect the P-trap, unscrew the nuts that connect the P-trap to the toilet and the drainpipe.

4. Install the new toilet. Once the old toilet is removed, you can install the new toilet. To do this, you will need to:

  • Place the new toilet on the floor and align it with the drainpipe.
  • Apply a bead of plumber’s putty around the base of the toilet.
  • Attach the wax ring to the bottom of the toilet.
  • Insert the toilet bolts through the holes in the toilet and tighten them.
  • Connect the water supply line to the toilet.
  • Connect the P-trap to the toilet and the drainpipe.

5. Turn on the water supply to the toilet. Once the new toilet is installed, you can turn on the water supply to the toilet. Flush the toilet to make sure that it is working properly.

Common Problems with Toilets and How to Fix Them

Toilets can develop a variety of problems over time. Here are some of the most common problems and how to fix them:

  • A running toilet: A running toilet can waste a lot of water and can be a nuisance. There are a few different reasons why a toilet might be running.
  • The flapper valve is not sealing properly. The flapper valve is a rubber disk that sits in the hole in the bottom of the toilet tank. When you flush the toilet, the flapper valve opens to allow water to flow into the bowl. If the flapper valve is not sealing properly, water will continue to flow into the bowl and the toilet will run. To fix this problem, you will need to replace the flapper valve.
  • The fill valve is not working properly. The fill valve is a valve that controls the amount of water that flows into the toilet tank. If the fill valve is not working properly, it may not be able to fill the tank all the way. This can cause the toilet to run constantly. To fix this problem, you will need to replace the fill valve.
  • The water supply line is leaking. The water supply line is the pipe that connects the water supply to the toilet. If the water supply line is leaking, it can cause the toilet to run constantly. To fix this problem, you will need to tighten the connection or replace the water supply line.
  • A clogged toilet: A clogged toilet can be a major inconvenience. There

    How much does it cost to replace a toilet?

The average cost to replace a toilet is between \$200 and \$600, depending on the type of toilet you choose and the complexity of the installation.

What factors affect the cost of replacing a toilet?

The following factors can affect the cost of replacing a toilet:

  • The type of toilet: The most expensive toilets are high-efficiency toilets (HETs) and toilets with bidets. Standard toilets cost less, and the least expensive toilets are gravity-fed toilets.
  • The size of the toilet: A larger toilet will cost more than a smaller toilet.
  • The material of the toilet: Toilets are made from a variety of materials, including porcelain, plastic, and stainless steel. Porcelain toilets are the most expensive, while plastic toilets are the least expensive.
  • The location of the toilet: If the toilet is located in a difficult-to-reach area, the cost of installation will be higher.
  • The cost of labor: The cost of labor can vary depending on the location and the experience of the plumber.

How can I save money on replacing a toilet?

There are a few ways to save money on replacing a toilet:

  • Shop around for the best price: Get quotes from multiple plumbers before making a decision.
  • Consider buying a used toilet: You can find used toilets for sale online or at salvage yards.
  • Do the installation yourself: If you’re handy, you can save money by installing the toilet yourself.

What are the steps involved in replacing a toilet?

Replacing a toilet is a relatively simple process, but it does require some basic plumbing skills. The following steps will walk you through the process:

1. Turn off the water supply to the toilet. This is usually located under the sink or behind the toilet.
2. Remove the old toilet. To do this, you will need to disconnect the water supply line, the drain line, and the toilet bolts.
3. Install the new toilet. To do this, you will need to connect the water supply line, the drain line, and the toilet bolts.
4. Turn on the water supply to the toilet.
5. Test the toilet to make sure it is working properly.

What are some common problems with toilets?

There are a number of common problems that can occur with toilets, including:

  • Clogged toilets: This is the most common problem with toilets. It can be caused by a variety of things, including flushed items, such as paper towels or feminine hygiene products, and tree roots.
  • Running toilets: This can be caused by a faulty flapper valve or a leak in the toilet tank.
  • Staining: This can be caused by hard water or rust.
  • Leaks: This can be caused by a faulty seal or a crack in the toilet bowl.

How can I troubleshoot common toilet problems?

There are a few simple things you can do to troubleshoot common toilet problems:

  • Check the water level in the toilet tank. If the water level is too high, it can cause the toilet to overflow. If the water level is too low, it can cause the toilet to run.
  • Check the flapper valve. The flapper valve is a rubber disk that sits in the hole in the bottom of the toilet tank. It is responsible for stopping the flow of water from the tank to the bowl. If the flapper valve is not properly seated, it can cause the toilet to run.
  • Check the toilet tank for leaks. Look for any cracks or leaks in the toilet tank. If you find a leak, you will need to replace the toilet tank.

What should I do if I can’t fix a toilet problem myself?

If you can’t fix a toilet problem yourself, you should call a plumber. A plumber can diagnose the problem and fix it quickly and efficiently.

How Much Does It Cost To Replace A Toilet?

The average cost to replace a toilet is between \$300 and \$1,000. The total cost will vary depending on the type of toilet you choose, the location of your home, and the cost of labor.

Here are some of the factors that will affect the cost of replacing your toilet:

  • The type of toilet you choose: A basic, one-piece toilet will be the most affordable option, while a high-end, two-piece toilet with all the bells and whistles will cost more.
  • The location of your home: If you live in a rural area, you may be able to find a local plumber who can do the job for less than someone who is located in a major city.
  • The cost of labor: The cost of labor can vary depending on the plumber you hire and the complexity of the job.

If you’re looking to save money on your toilet replacement, you can do some of the work yourself. For example, you can remove the old toilet and dispose of it, and then you can connect the new toilet to the water supply and sewer line. However, it’s important to make sure you know what you’re doing before you start working on your toilet. If you’re not comfortable doing the work yourself, it’s best to hire a professional plumber.

Replacing a toilet is a major project, but it’s one that can save you money in the long run. By doing your research and choosing the right toilet for your home, you can get a new toilet that will last for years to come.

Key Takeaways:

  • The average cost to replace a toilet is between \$300 and \$1,000.
  • The total cost will vary depending on the type of toilet you choose, the location of your home, and the cost of labor.
  • If you’re looking to save money on your toilet replacement, you can do some of the work yourself. However, it’s important to make sure you know what you’re doing before you start working on your toilet.
  • Replacing a toilet is a major project, but it’s one that can save you money in the long run. By doing your research and choosing the right toilet for your home, you can get a new toilet that will last for years to come.

Author Profile

Liana Farrell
Liana Farrell
Liana Farrell is the owner of toiletty.com. She is a mom of two and is very passionate about home improvement.

Liana has ten years of home improvement experience, and in her own words, she said: “I love improving the home, and I’m very passionate about keeping the home in the best possible condition. I love it!”

Liana Farrell balances beauty and functionality when she goes about her home improvement jobs.