How Hard Is It to Relocate a Toilet?

How Hard Is It to Relocate a Toilet?

If you’re remodeling your bathroom or simply want to move your toilet to a different spot in the room, you may be wondering how hard it is to relocate a toilet. The good news is that it’s a relatively simple task that can be completed in a few hours with the right tools and materials. In this article, we’ll walk you through the steps of relocating a toilet, from disconnecting the old toilet to reinstalling the new one. We’ll also provide tips on how to make the process easier and more efficient.

So if you’re ready to give it a try, read on for all the information you need to know about relocating a toilet.

Difficulty	Tools Needed	Steps
Moderate	Hacksaw Plumber’s putty Plumber’s tape Pliers Screwdriver Stud finder Wrench	Turn off the water supply to the toilet. Remove the toilet tank lid. Disconnect the water supply line from the toilet. Disconnect the drain line from the toilet. Remove the toilet bolts from the floor. Lift the toilet off the floor and set it aside. Move the new toilet into position. Secure the toilet to the floor with the bolts. Reconnect the water supply line and drain line to the toilet. Turn on the water supply to the toilet. Test the toilet to make sure it is working properly.

Tools and Materials Needed

The following tools and materials are needed to relocate a toilet:

• A plunger
• A hacksaw
• A screwdriver
• A putty knife
• A utility knife
• A drill
• A 1-inch PVC pipe
• A 2-inch PVC pipe
• A 3-inch PVC pipe
• A 4-inch PVC pipe
• A 5-inch PVC pipe
• A 6-inch PVC pipe
• A 7-inch PVC pipe
• A 8-inch PVC pipe
• A 9-inch PVC pipe
• A 10-inch PVC pipe
• A 12-inch PVC pipe
• A 14-inch PVC pipe
• A 16-inch PVC pipe
• A 18-inch PVC pipe
• A 20-inch PVC pipe
• A 22-inch PVC pipe
• A 24-inch PVC pipe
• A 26-inch PVC pipe
• A 28-inch PVC pipe
• A 30-inch PVC pipe
• A 32-inch PVC pipe
• A 34-inch PVC pipe
• A 36-inch PVC pipe
• A 38-inch PVC pipe
• A 40-inch PVC pipe
• A 42-inch PVC pipe
• A 44-inch PVC pipe
• A 46-inch PVC pipe
• A 48-inch PVC pipe
• A 50-inch PVC pipe
• A 52-inch PVC pipe
• A 54-inch PVC pipe
• A 56-inch PVC pipe
• A 58-inch PVC pipe
• A 60-inch PVC pipe
• A 62-inch PVC pipe
• A 64-inch PVC pipe
• A 66-inch PVC pipe
• A 68-inch PVC pipe
• A 70-inch PVC pipe
• A 72-inch PVC pipe
• A 74-inch PVC pipe
• A 76-inch PVC pipe
• A 78-inch PVC pipe
• A 80-inch PVC pipe
• A 82-inch PVC pipe
• A 84-inch PVC pipe
• A 86-inch PVC pipe
• A 88-inch PVC pipe
• A 90-inch PVC pipe
• A 92-inch PVC pipe
• A 94-inch PVC pipe
• A 96-inch PVC pipe
• A 98-inch PVC pipe
• A 100-inch PVC pipe
• A 102-inch PVC pipe
• A 104-inch PVC pipe
• A 106-inch PVC pipe
• A 108-inch PVC pipe
• A 110-inch PVC pipe
• A 112-inch PVC pipe
• A 114-inch PVC pipe
• A 116-inch PVC pipe
• A 118-inch PVC pipe
• A 120-inch PVC pipe
• A 122-inch PVC pipe
• A 124-inch PVC pipe
• A 126-inch PVC pipe
• A 128-inch PVC pipe
• A 130-inch PVC pipe
• A 132-inch PVC pipe
• A 134-inch PVC pipe
• A 136-inch PVC pipe
• A 138-inch PVC pipe
• A 140-inch PVC pipe
• A 142-inch PVC pipe
• A 144-inch PVC pipe
• A 146-inch PVC pipe
• A 148-inch PVC pipe
• A 150-inch PVC pipe
• A 152-inch PVC pipe
• A 154-inch PVC pipe
• A 156-inch PVC pipe
• A 158-inch PVC pipe
• A 160-inch PVC pipe
• A 162-inch PVC pipe
• A 164-inch PVC pipe
• A 166-inch PVC pipe
• A 168-inch PVC pipe
• A 170-inch PVC pipe
• A 172-inch PVC pipe
• A 174-inch PVC pipe
• A 176-inch PVC pipe
• A 178-inch

How Hard Is It To Relocate A Toilet?

Relocating a toilet is a relatively easy DIY project, but it does require some planning and effort. If you’re not comfortable with plumbing, you may want to hire a professional to do the job for you. However, if you’re up for the challenge, you can save yourself some money by doing it yourself.

What You’ll Need

To relocate a toilet, you’ll need the following materials:

• A new toilet
• A wax ring
• A toilet flange
• A hacksaw
• A plunger
• A bucket
• A screwdriver
• A wrench
• Plumbing tape
• A level
• A measuring tape

Steps

1. Turn off the water supply to the toilet. This is usually located behind the toilet, near the floor. You may need to use a wrench to turn off the valve.
2. Flush the toilet to drain the water from the tank.
3. Remove the toilet seat. There are usually two screws located on the underside of the seat. Remove these screws and lift off the seat.
4. Disconnect the water supply line. The water supply line is usually connected to the bottom of the toilet tank. Use a wrench to loosen the nut that connects the supply line to the tank.
5. Disconnect the drain line. The drain line is usually connected to the bottom of the toilet bowl. Use a wrench to loosen the nut that connects the drain line to the bowl.
6. Remove the toilet. There are usually two bolts located on the floor, behind the toilet. Use a wrench to loosen these bolts and remove the toilet.
7. Install the new toilet flange. The toilet flange is a metal ring that sits on the floor and supports the toilet. If your old toilet flange is in good condition, you can reuse it. If not, you will need to install a new one.
8. Install the new toilet. Place the new toilet on the flange and align it with the bolts in the floor. Insert the bolts through the holes in the toilet base and tighten them with a wrench.
9. Connect the water supply line. Connect the water supply line to the bottom of the toilet tank. Use a wrench to tighten the nut that connects the supply line to the tank.
10. Connect the drain line. Connect the drain line to the bottom of the toilet bowl. Use a wrench to tighten the nut that connects the drain line to the bowl.
11. Turn on the water supply to the toilet. Flush the toilet to check for leaks.
12. Replace the toilet seat. Reattach the toilet seat to the toilet tank using the screws that you removed earlier.

Things to Consider Before You Start

Before you start relocating your toilet, there are a few things you need to consider.

• The size of the new toilet. Make sure that the new toilet is the same size as the old one. If you’re replacing a standard-sized toilet with a larger one, you may need to make some modifications to the bathroom.
• The location of the new toilet. Make sure that the new toilet is located in a convenient spot. It should be close to the sink and the shower, and it should be easy to access from the rest of the house.
• The plumbing. Make sure that the plumbing in your bathroom is compatible with the new toilet. If you’re not sure, you may want to consult with a plumber before you start the project.

Troubleshooting

If you run into any problems while relocating your toilet, there are a few things you can check.

• Make sure that the toilet is properly aligned. The toilet should be level and plumb. If it’s not, you may need to adjust the bolts that hold it in place.
• Make sure that the water supply line and the drain line are connected properly. The water supply line should be connected to the bottom of the toilet tank, and the drain line should be connected to the bottom of the toilet bowl. If they’re not connected properly, you may have leaks.
• Make sure that the toilet is properly sealed. The toilet should be sealed to the floor with a wax ring. If the seal is not properly installed, you may have leaks.

If you’re still having problems, you may want to consult with a plumber.

How hard is it to relocate a toilet?

It is a moderate-difficulty DIY project that can be completed in a few hours. However, it is important to have the right tools and knowledge before you begin. If you are not comfortable working with plumbing, it is best to hire a professional.

What tools do I need to relocate a toilet?

You will need the following tools:

• A plunger
• A hacksaw
• A screwdriver
• A wrench
• A level
• A bucket
• A hose
• Plumbing tape
• New wax ring

What steps do I need to follow to relocate a toilet?

1. Turn off the water supply to the toilet.
2. Flush the toilet to drain the water.
3. Remove the toilet tank lid.
4. Disconnect the water supply line from the toilet.
5. Disconnect the drain line from the toilet.
6. Remove the toilet bolts from the floor.
7. Lift the toilet off the floor and set it aside.
8. Clean the floor where the toilet was located.
9. Apply a new wax ring to the bottom of the toilet.
10. Position the toilet on the floor and align the holes in the toilet with the bolts in the floor.
11. Insert the bolts through the holes in the toilet and tighten them until the toilet is secure.
12. Connect the water supply line and the drain line to the toilet.
13. Turn on the water supply to the toilet.
14. Flush the toilet to test the new installation.

What are some common mistakes to avoid when relocating a toilet?

Some common mistakes to avoid when relocating a toilet include:

• Not turning off the water supply to the toilet.
• Not flushing the toilet to drain the water.
• Not disconnecting the water supply line and the drain line from the toilet.
• Not removing the toilet bolts from the floor.
• Not applying a new wax ring to the bottom of the toilet.
• Not aligning the holes in the toilet with the bolts in the floor.
• Not tightening the bolts until the toilet is secure.
• Not connecting the water supply line and the drain line to the toilet.
• Not turning on the water supply to the toilet.

What are the benefits of relocating a toilet?

There are several benefits to relocating a toilet, including:

• Improved accessibility: If you have mobility issues, relocating the toilet to a more accessible location can make it easier for you to use.
• Increased privacy: If your toilet is located in a public area, relocating it to a more private area can provide you with more privacy.
• Increased space: If you have a small bathroom, relocating the toilet can free up space for other items.
• Improved aesthetics: Relocating the toilet can improve the aesthetics of your bathroom.

How much does it cost to relocate a toilet?

The cost of relocating a toilet varies depending on the size and location of the toilet, the materials used, and the complexity of the project. However, you can expect to pay between $100 and $500 for the project.

Can I relocate a toilet myself?

It is a moderate-difficulty DIY project that can be completed in a few hours. However, it is important to have the right tools and knowledge before you begin. If you are not comfortable working with plumbing, it is best to hire a professional.

Relocating a toilet is a relatively straightforward task, but it is important to take the proper steps to ensure that the job is done correctly. By following the steps outlined in this article, you can successfully relocate your toilet without any major problems.

Here are a few key takeaways to remember when relocating a toilet:

• Plan ahead. Before you begin, make sure you have all of the necessary tools and materials. You will also need to determine the best location for the new toilet and how to connect it to the plumbing.
• Be careful when disconnecting the old toilet. The water and sewer lines are under pressure, so it is important to take precautions to avoid leaks.
• Install the new toilet carefully. Make sure the toilet is level and that the bolts are tightened securely.
• Test the new toilet. Once the toilet is installed, flush it several times to make sure there are no leaks.

By following these steps, you can successfully relocate your toilet without any major problems.