How to Dispose of an Old Toilet the Right Way (Step-by-Step Guide)

AvatarByLiana Farrell Toilet Queries

How to Get Rid of an Old Toilet

Your old toilet has seen better days. It’s stained, it leaks, and it just doesn’t work like it used to. You’ve been thinking about getting a new one for a while now, but you’re not sure how to get rid of the old one.

Don’t worry, we’re here to help. In this article, we’ll walk you through the process of getting rid of an old toilet, from start to finish. We’ll cover everything you need to know, including how to disconnect the toilet from the water supply and drain, how to remove the toilet from the floor, and how to dispose of it properly.

So if you’re ready to say goodbye to your old toilet, read on!

Step Instructions Image
1 Turn off the water supply to the toilet.
2 Remove the toilet tank lid.
3 Disconnect the water supply line from the toilet.
4 Disconnect the drain line from the toilet.
5 Lower the toilet bowl from the toilet base.
6 Remove the toilet from the bathroom.
7 Dispose of the old toilet.

How Do I Get Rid Of An Old Toilet?

Planning

Before you remove an old toilet, there are a few things you need to do to prepare.

What do you need to do before you remove the toilet?

  • Turn off the water supply to the toilet. This is usually done by turning off the shut-off valve located under the sink or behind the toilet.
  • Flush the toilet to drain any remaining water.
  • Disconnect the water supply line to the toilet. The water supply line is usually a 1/2-inch copper or plastic pipe that connects to the toilet at the back. To disconnect the water supply line, you will need to use a wrench to loosen the nut that connects the line to the toilet.
  • Disconnect the sewer line from the toilet. The sewer line is usually a 3-inch PVC pipe that connects to the toilet at the bottom. To disconnect the sewer line, you will need to use a wrench to loosen the nut that connects the line to the toilet.
  • Cover the drain hole in the floor with a bucket or a piece of plywood to prevent sewer gas from escaping.

What tools and materials will you need?

  • Adjustable wrench
  • Pliers
  • Bucket or piece of plywood
  • Gloves
  • Safety glasses

Where will you dispose of the old toilet?

You can dispose of an old toilet in one of the following ways:

  • Take it to a landfill or recycling center. Most landfills and recycling centers accept old toilets.
  • Donate it to a salvage or reuse store. Some salvage or reuse stores accept old toilets.
  • Sell it online or in a classified ad. You can sell your old toilet online or in a classified ad.

Removing the Toilet

Once you have prepared the toilet for removal, you can begin the process of removing it.

How do you disconnect the toilet from the water supply and sewer line?

To disconnect the toilet from the water supply and sewer line, you will need to:

1. Turn off the water supply to the toilet.
2. Flush the toilet to drain any remaining water.
3. Disconnect the water supply line to the toilet.
4. Disconnect the sewer line from the toilet.
5. Cover the drain hole in the floor with a bucket or a piece of plywood to prevent sewer gas from escaping.

How do you remove the toilet from the floor?

To remove the toilet from the floor, you will need to:

1. Put on gloves and safety glasses.
2. Place a bucket or piece of plywood under the toilet to catch any water that may leak out.
3. Use a wrench to loosen the nuts that connect the toilet to the floor.
4. Carefully lift the toilet up and away from the floor.
5. Place the toilet in a safe location until you are ready to dispose of it.

Removing an old toilet can be a daunting task, but it is a necessary one if you are replacing your toilet. By following these steps, you can safely and easily remove your old toilet and dispose of it properly.

Disposal of the Old Toilet

Once you have removed the old toilet from your home, you need to dispose of it properly. There are a few different ways to do this, depending on your local regulations.

How do you dispose of the old toilet in a landfill?

If you live in an area where there is a landfill, you can usually dispose of your old toilet there. However, there are a few things you need to keep in mind.

  • First, make sure that your old toilet is empty. You don’t want to create a mess at the landfill.
  • Second, remove the lid from the toilet. This will make it easier to load the toilet onto the truck.
  • Third, wrap the toilet in a tarp or plastic sheet. This will help to protect the toilet from damage and keep it from leaking.
  • Fourth, bring the toilet to the landfill. Most landfills have a designated area for disposing of toilets.

How do you dispose of the old toilet by recycling or donating it?

If you live in an area where there is a recycling center, you may be able to recycle your old toilet. However, not all toilets can be recycled. You will need to check with your local recycling center to see if they accept toilets.

If you are unable to recycle your old toilet, you may be able to donate it to a charity or thrift store. Many charities and thrift stores accept used toilets. However, you will need to check with the organization to see if they have any specific requirements for donating a toilet.

Cleaning Up

Once you have disposed of the old toilet, you need to clean up the area where the toilet was removed. This will help to prevent mold and mildew from growing.

How do you clean up the area where the toilet was removed?

To clean up the area where the toilet was removed, you will need the following supplies:

  • A bucket
  • A mop
  • A brush
  • A cleaning solution
  • A pair of gloves

Instructions:

1. Put on your gloves.
2. Pour the cleaning solution into the bucket.
3. Dip the mop into the cleaning solution.
4. Mop the floor around the toilet.
5. Use the brush to clean any stubborn stains.
6. Rinse the floor with clean water.
7. Dry the floor with a towel.

How do you prevent mold and mildew from growing?

To prevent mold and mildew from growing, you can take the following steps:

  • Keep the area around the toilet dry.
  • Wipe up any spills immediately.
  • Use a dehumidifier to help keep the air dry.
  • Air out the bathroom regularly.
  • Apply a mold and mildew sealant to the floor around the toilet.

By following these steps, you can help to keep your bathroom clean and free of mold and mildew.

How do I remove an old toilet?

1. Turn off the water supply to the toilet. This is usually located under the sink or behind the toilet. Turn the valve clockwise until it is completely closed.
2. Flush the toilet to empty the tank. This will help to loosen any debris that may be stuck in the toilet bowl.
3. Remove the toilet seat. There are usually two bolts located on the underside of the toilet seat. Use a screwdriver to loosen these bolts and remove the seat.
4. Disconnect the water supply line. The water supply line is usually located on the back of the toilet. Use a wrench to loosen the nut that connects the supply line to the toilet.
5. Disconnect the drain line. The drain line is usually located on the bottom of the toilet. Use a wrench to loosen the nut that connects the drain line to the toilet.
6. Remove the toilet. Grab the toilet on both sides and lift it straight up. It may be necessary to rock the toilet back and forth to get it to move.
7. Clean up the area. Use a mop or a wet/dry vacuum to clean up any water or debris that was left behind.

What do I do with the old toilet?

You can either dispose of the old toilet yourself or have it professionally removed. If you are disposing of the toilet yourself, you will need to take it to a local landfill or recycling center. Make sure that the toilet is empty and clean before you take it to be disposed of. If you are having the toilet professionally removed, you will need to contact a local plumber or junk removal company.

How much does it cost to remove an old toilet?

The cost of removing an old toilet will vary depending on the size of the toilet, the location of the toilet, and the company that you hire. The average cost of removing an old toilet is between $100 and $200.

Can I replace an old toilet with a new one myself?

Yes, you can replace an old toilet with a new one yourself. However, it is important to make sure that you have the proper tools and skills before you begin. If you are not comfortable doing this type of work, it is best to hire a professional plumber.

What are the benefits of replacing an old toilet with a new one?

There are many benefits to replacing an old toilet with a new one. These benefits include:

  • Improved water efficiency. New toilets are much more water efficient than older toilets. This can save you money on your water bill.
  • Comfortable flushing. New toilets have a powerful flush that removes waste quickly and efficiently. This can help to keep your bathroom clean and sanitary.
  • Durability. New toilets are made from high-quality materials that are designed to last for many years. This means that you won’t have to worry about replacing your toilet again anytime soon.

What should I look for when buying a new toilet?

When buying a new toilet, there are a few things that you should keep in mind. These include:

  • Size. Make sure that the new toilet is the right size for your bathroom.
  • Flushing power. The new toilet should have a powerful flush that removes waste quickly and efficiently.
  • Water efficiency. The new toilet should be as water efficient as possible.
  • Materials. The new toilet should be made from high-quality materials that are durable and long-lasting.

How can I prevent my new toilet from leaking?

There are a few things that you can do to prevent your new toilet from leaking. These include:

  • Install the toilet correctly. Make sure that the toilet is installed properly and that all of the connections are tight.
  • Use a wax ring. A wax ring is a rubber ring that is placed between the toilet and the floor. It helps to create a watertight seal and prevents leaks.
  • Inspect the toilet regularly. Check the toilet regularly for leaks. If you see any water under the toilet, tighten the connections or replace the wax ring.

Getting rid of an old toilet can be a daunting task, but it is one that can be accomplished with a little planning and effort. By following the steps outlined in this article, you can safely and efficiently remove your old toilet and make way for a new one.

Here are the key takeaways from this article:

  • Before you begin, make sure you have the necessary tools and materials.
  • Carefully disconnect the toilet from the water supply and sewer line.
  • Remove the toilet from the floor and dispose of it properly.
  • Clean the area where the toilet was located and replace the toilet flange if necessary.

By following these steps, you can easily and safely get rid of your old toilet and make way for a new one.

Author Profile

Liana Farrell
Liana Farrell
Liana Farrell is the owner of toiletty.com. She is a mom of two and is very passionate about home improvement.

Liana has ten years of home improvement experience, and in her own words, she said: “I love improving the home, and I’m very passionate about keeping the home in the best possible condition. I love it!”

Liana Farrell balances beauty and functionality when she goes about her home improvement jobs.