Can a Toilet Be Moved? (The Complete Guide)

AvatarByLiana Farrell Toilet Queries

Can a Toilet Be Moved?

The humble toilet is one of the most important fixtures in our homes, but it’s also one of the most difficult to move. Whether you’re remodeling your bathroom or simply want to give your toilet a new look, moving it can seem like a daunting task. But it’s actually not as hard as you might think.

In this article, we’ll walk you through the process of moving a toilet, step-by-step. We’ll cover everything from disconnecting the plumbing to reattaching the toilet to the floor. So if you’re ready to give it a try, read on!

| Can a Toilet Be Moved? | Yes | No |
|—|—|—|
| Can a toilet be moved? | It is possible to move a toilet, but it is a major plumbing project. | It is not possible to move a toilet without major plumbing work. |

Moving a toilet is a major project that should only be undertaken by someone who is experienced in plumbing and construction. However, if you are confident in your abilities, you can save yourself a lot of money by moving your toilet yourself.

This guide will walk you through the process of moving a toilet, from start to finish. We will cover everything you need to know, including how to remove the toilet from its current location, how to install it in its new location, and how to connect it to the plumbing.

We will also provide tips on how to make the job easier and how to avoid common mistakes.

What is involved in moving a toilet?

Moving a toilet involves a number of steps, including:

  • Removing the toilet from its current location
  • Installing the toilet in its new location
  • Connecting the toilet to the plumbing
  • Testing the toilet to make sure it is working properly

Removing the toilet from its current location

The first step in moving a toilet is to remove it from its current location. To do this, you will need to:

1. Turn off the water supply to the toilet.
2. Flush the toilet to drain the water from the tank.
3. Remove the bolts that hold the toilet to the floor.
4. Lift the toilet up and out of the way.

Installing the toilet in its new location

Once you have removed the toilet from its current location, you can install it in its new location. To do this, you will need to:

1. Level the floor where the toilet will be installed.
2. Apply a bead of plumber’s putty around the base of the toilet.
3. Position the toilet on the floor and insert the bolts through the holes in the base of the toilet.
4. Tighten the bolts until the toilet is secure.

Connecting the toilet to the plumbing

Once the toilet is installed, you will need to connect it to the plumbing. To do this, you will need to:

1. Connect the water supply line to the toilet.
2. Connect the drain line to the toilet.
3. Turn on the water supply to the toilet.

Testing the toilet to make sure it is working properly

Once you have connected the toilet to the plumbing, you should test it to make sure it is working properly. To do this, you will need to:

1. Flush the toilet.
2. Check for leaks around the base of the toilet.
3. Make sure the toilet is draining properly.

If the toilet is not working properly, you may need to adjust the bolts that hold the toilet to the floor or you may need to call a plumber.

What are the factors to consider when moving a toilet?

There are a number of factors to consider when moving a toilet, including:

  • The size and weight of the toilet
  • The type of flooring in the bathroom
  • The location of the toilet in the bathroom
  • The plumbing in the bathroom

The size and weight of the toilet

The size and weight of the toilet will affect how difficult it is to move. A large, heavy toilet will be more difficult to move than a small, lightweight toilet.

The type of flooring in the bathroom

The type of flooring in the bathroom will also affect how difficult it is to move the toilet. If the floor is smooth and hard, it will be easier to move the toilet than if the floor is textured or carpeted.

The location of the toilet in the bathroom

The location of the toilet in the bathroom will also affect how difficult it is to move. A toilet that is located in a central location will be easier to move than a toilet that is located in a corner or against a wall.

The plumbing in the bathroom

The plumbing in the bathroom will also affect how difficult it is to move the toilet. If the toilet is connected to a cast iron drain, it will be more difficult to move than if the toilet is connected to a PVC drain.

Moving a toilet is a major project that should only be undertaken by someone who is experienced in plumbing and construction. However, if you are confident in your abilities, you can save yourself a lot of money by moving your toilet yourself.

This guide has provided you with the information you need to know to move a toilet, from start to finish. By following these steps, you can safely and successfully move your toilet to its new location.

Can a Toilet Be Moved?

Yes, a toilet can be moved. However, it is a relatively involved process that requires some planning and preparation. If you are not comfortable with DIY projects, it is best to hire a professional plumber to move your toilet.

How to move a toilet safely?

To move a toilet safely, you will need the following tools and equipment:

  • A plunger
  • A hacksaw
  • A screwdriver
  • A wrench
  • A bucket
  • A tarp
  • A pair of gloves
  • Safety glasses

Step 1: Turn off the water supply to the toilet.

The first step is to turn off the water supply to the toilet. This can usually be done by turning off the main water valve located near the water meter. Once the water supply is turned off, flush the toilet to drain any remaining water.

Step 2: Remove the toilet tank lid.

The next step is to remove the toilet tank lid. This can usually be done by unscrewing the two bolts that hold the lid in place. Once the lid is removed, you will be able to access the inside of the toilet tank.

Step 3: Disconnect the water supply line.

The water supply line is the flexible hose that connects the toilet tank to the water supply. To disconnect the water supply line, you will need to use a wrench to loosen the nut that connects the line to the toilet tank. Once the nut is loosened, you can disconnect the line and remove it from the toilet.

Step 4: Disconnect the drain line.

The drain line is the pipe that connects the toilet to the sewer line. To disconnect the drain line, you will need to use a hacksaw to cut the pipe behind the toilet. Once the pipe is cut, you can remove the toilet from the floor.

Step 5: Move the toilet to its new location.

Once the toilet is disconnected from the water and drain lines, you can move it to its new location. Be sure to lift the toilet carefully so that you do not damage the bowl or the tank.

Step 6: Reattach the water supply line and drain line.

Once the toilet is in its new location, you can reattach the water supply line and drain line. Be sure to tighten the nuts and bolts securely so that there are no leaks.

Step 7: Turn on the water supply to the toilet.

The final step is to turn on the water supply to the toilet. This can usually be done by turning on the main water valve located near the water meter. Once the water supply is turned on, flush the toilet to check for leaks.

What are the potential risks of moving a toilet?

There are a few potential risks associated with moving a toilet, including:

  • Damaging the toilet or the plumbing
  • Creating a mess
  • Injuring yourself

Damaging the toilet or the plumbing

If you are not careful, you could damage the toilet or the plumbing while moving it. This could result in leaks, flooding, or other costly repairs.

Creating a mess

Moving a toilet can create a mess. You will need to be prepared to clean up water, dirt, and other debris.

Injuring yourself

Moving a toilet can be a physically demanding task. If you are not careful, you could injure yourself by lifting the toilet incorrectly or by dropping it.

Moving a toilet is a relatively involved process that requires some planning and preparation. If you are not comfortable with DIY projects, it is best to hire a professional plumber to move your toilet.

Can a toilet be moved?

Yes, a toilet can be moved, but it is a major plumbing project that should only be attempted by a qualified plumber. The process involves disconnecting the toilet from the water supply and sewer line, removing the toilet from its base, and reinstalling it in a new location.

What is involved in moving a toilet?

Moving a toilet involves the following steps:

1. Disconnecting the toilet from the water supply and sewer line.
2. Removing the toilet from its base.
3. Installing a new toilet flange in the new location.
4. Installing the toilet on the new flange.
5. Connecting the toilet to the water supply and sewer line.

How much does it cost to move a toilet?

The cost of moving a toilet varies depending on the location of the toilet, the type of toilet, and the complexity of the plumbing work involved. The average cost to move a toilet is between $200 and $500.

Is it difficult to move a toilet?

Moving a toilet is a major plumbing project that should only be attempted by a qualified plumber. The process is difficult and requires specialized tools and knowledge.

What are the risks of moving a toilet?

There are a number of risks associated with moving a toilet, including:

  • Damage to the toilet.
  • Damage to the plumbing.
  • Flooding.
  • Electrical shock.

How can I avoid the risks of moving a toilet?

To avoid the risks of moving a toilet, it is important to hire a qualified plumber to do the job. A qualified plumber will have the experience and knowledge to safely move your toilet without causing damage.

moving a toilet is a job that can be done by a DIYer with some basic tools and know-how. However, it is important to carefully follow the steps in the guide to ensure that the job is done correctly and safely. By taking the time to properly prepare and plan, you can avoid any potential problems and have a new toilet installed in no time.

Here are some key takeaways from the article:

  • Toilets are heavy and bulky, so it is important to have help when moving them.
  • The first step is to disconnect the water supply and drain the toilet.
  • Once the toilet is empty, you can remove the bolts that hold it to the floor.
  • Carefully lift the toilet and move it to its new location.
  • Reattach the toilet to the floor and reconnect the water supply and drain.
  • Test the toilet to make sure it is working properly.

By following these steps, you can successfully move your toilet and have a new one installed in no time.

Author Profile

Liana Farrell
Liana Farrell
Liana Farrell is the owner of toiletty.com. She is a mom of two and is very passionate about home improvement.

Liana has ten years of home improvement experience, and in her own words, she said: “I love improving the home, and I’m very passionate about keeping the home in the best possible condition. I love it!”

Liana Farrell balances beauty and functionality when she goes about her home improvement jobs.