How to Repair a Cracked Toilet Tank: A Step-by-Step Guide
How to Fix a Crack in a Toilet Tank
A cracked toilet tank can be a major inconvenience, but it’s a relatively easy fix that you can do yourself. In this article, we’ll walk you through the steps of repairing a cracked toilet tank, from start to finish. We’ll also provide some tips on preventing future cracks.
So if you’re looking to save some money and get your toilet back in working order, read on for all the information you need to know!
| Step | Action | Tools |
|—|—|—|
| 1 | Turn off the water supply to the toilet. | Shutoff valve |
| 2 | Remove the toilet tank lid. | Flathead screwdriver |
| 3 | Locate the crack. | Eyeball |
| 4 | Apply a sealant to the crack. | Epoxy putty |
| 5 | Allow the sealant to dry. | 24 hours |
| 6 | Reattach the toilet tank lid. | Flathead screwdriver |
| 7 | Turn the water supply back on. | Shutoff valve |
Identifying the Crack
How to tell if your toilet tank has a crack
There are a few ways to tell if your toilet tank has a crack.
- Visual inspection: The most obvious sign of a crack is a visible break in the tank. This can be seen from the outside of the tank, or by looking inside the tank through the overflow pipe.
- Sound: If you hear a dripping or running sound coming from your toilet, it could be a sign of a leak caused by a crack.
- Leak: If you notice water pooling around the base of your toilet, or if your water bill suddenly increases, it could be a sign that you have a leak.
Where to look for cracks
The most common place for cracks to occur in a toilet tank is at the seams. This is because the seams are the weakest points in the tank. Cracks can also occur in the bottom of the tank, or around the overflow pipe.
What different types of cracks there are
There are three main types of cracks that can occur in a toilet tank:
- Horizontal cracks: These cracks run horizontally across the tank. They are often caused by the tank being subjected to too much pressure, or by the tank being dropped.
- Vertical cracks: These cracks run vertically down the tank. They are often caused by the tank being hit by something hard, or by the tank being frozen.
- Circumferential cracks: These cracks circle the tank. They are often caused by the tank being subjected to too much stress, or by the tank being overfilled.
Getting Ready to Fix the Crack
Gather your materials
To fix a crack in your toilet tank, you will need the following materials:
- A new toilet tank repair kit
- A putty knife
- A caulking gun
- A bucket of water
- A sponge
- A screwdriver
- A pair of pliers
Prepare the area around the crack
Before you can fix the crack, you will need to prepare the area around the crack. This involves removing any dirt or debris from the area, and making sure that the area is dry.
To do this, you can use a bucket of water and a sponge to clean the area around the crack. You can also use a putty knife to remove any loose debris. Once the area is clean and dry, you can move on to the next step.
Fixing the Crack
Apply the repair kit
Once the area around the crack is prepared, you can apply the repair kit. To do this, follow the instructions on the package.
Generally, you will need to first apply a layer of sealant to the inside of the crack. You can then apply a patch over the sealant. The patch will be held in place by the sealant.
Once the repair kit has been applied, you will need to let it dry for the amount of time specified on the package.
Caulk the crack
Once the repair kit has dried, you can caulk the crack. To do this, you will need to use a caulking gun to apply a bead of caulk around the outside of the crack.
The caulk will help to seal the crack and prevent water from leaking.
Test the toilet
Once the caulk has dried, you can test the toilet to make sure that the crack has been fixed. To do this, flush the toilet and watch for any leaks.
If there are no leaks, then the crack has been successfully fixed.
Fixing a crack in a toilet tank is a relatively simple process. By following the steps in this guide, you can easily and quickly fix the crack and prevent further damage to your toilet.
Here are some additional tips for fixing a crack in a toilet tank:
- Make sure that the toilet is turned off before you begin working on it.
- Wear gloves to protect your hands.
- Work in a well-ventilated area.
- Follow the instructions on the repair kit carefully.
- If you are not comfortable doing this type of work, you can hire a professional to fix the crack for you.
Repairing the Crack
There are a few different ways to repair a crack in a toilet tank. The best method for you will depend on the size and location of the crack.
Choosing the right repair method
If the crack is small and located on the outside of the tank, you can probably fix it with a simple epoxy repair kit. These kits come with everything you need to repair the crack, including epoxy resin, hardener, and a mixing stick.
To use an epoxy repair kit, follow these steps:
1. Clean the area around the crack with a degreaser or rubbing alcohol.
2. Mix the epoxy resin and hardener according to the package directions.
3. Apply the epoxy to the crack, using a putty knife or other applicator.
4. Allow the epoxy to cure according to the package directions.
Applying the repair material
If the crack is larger or located on the inside of the tank, you will need to use a more durable repair material, such as fiberglass resin. Fiberglass resin is a two-part epoxy that is reinforced with fiberglass strands. It is more difficult to work with than epoxy, but it will create a stronger repair.
To use fiberglass resin, follow these steps:
1. Clean the area around the crack with a degreaser or rubbing alcohol.
2. Mix the fiberglass resin and hardener according to the package directions.
3. Apply the fiberglass resin to the crack, using a putty knife or other applicator.
4. While the resin is still wet, sprinkle fiberglass strands over the crack.
5. Allow the resin to cure according to the package directions.
Testing the repair
Once the repair has cured, you should test it to make sure it is watertight. Fill the toilet tank with water and watch for any leaks. If you see any leaks, you may need to apply more repair material or redo the repair.
Preventing Future Cracks
The best way to prevent cracks from forming in your toilet tank is to take good care of it. This means flushing it regularly, keeping the water level at the proper level, and not overloading it with too much toilet paper. You should also avoid using harsh chemicals or cleaners in your toilet tank, as these can damage the porcelain.
If you do notice a crack in your toilet tank, it is important to fix it as soon as possible. A crack can allow water to leak into the tank, which can damage the toilet and create a health hazard.
What to do if your toilet tank cracks again
If your toilet tank cracks again after you have repaired it, you may need to replace the tank. Replacing a toilet tank is a relatively simple task, but it is important to make sure you do it correctly. To replace a toilet tank, follow these steps:
1. Turn off the water supply to the toilet.
2. Drain the water from the toilet tank.
3. Remove the old tank by disconnecting the water supply line and the drain line.
4. Install the new tank by connecting the water supply line and the drain line.
5. Reattach the toilet seat.
Once you have replaced the toilet tank, you should test it to make sure it is working properly. Fill the toilet tank with water and watch for any leaks. If you see any leaks, you may need to tighten the connections or redo the repair.
How do I fix a crack in my toilet tank?
1. Turn off the water supply to the toilet. This is usually located under the sink or behind the toilet.
2. Remove the lid of the toilet tank. There will be two bolts on the back of the tank that you will need to unscrew.
3. Inspect the crack. The crack may be on the inside or outside of the tank. If it is on the inside, you will need to remove the toilet bowl to access it.
4. Apply a sealant to the crack. You can use a silicone sealant or a epoxy putty. Be sure to follow the directions on the product label.
5. Reassemble the toilet tank. Make sure that the bolts are tight and that the lid is securely attached.
6. Turn the water supply back on. Flush the toilet to make sure that the seal is working properly.
What if the crack is too large to fix with a sealant?
If the crack is too large to fix with a sealant, you will need to replace the toilet tank. This is a relatively simple task that can be completed in about an hour.
1. Turn off the water supply to the toilet.
2. Disconnect the water supply line from the toilet tank.
3. Remove the bolts that hold the toilet tank to the toilet bowl.
4. Lift the toilet tank off of the toilet bowl.
5. Install the new toilet tank.
6. Reconnect the water supply line to the toilet tank.
7. Turn the water supply back on.
How can I prevent cracks in my toilet tank?
There are a few things you can do to prevent cracks in your toilet tank:
- Use a toilet bowl cleaner that is safe for the tank. Some toilet bowl cleaners can be corrosive and damage the tank.
- Don’t overfill the toilet tank. When the tank is overfilled, it can put stress on the porcelain and cause it to crack.
- Don’t drop anything heavy in the toilet tank. This can also cause the tank to crack.
- Inspect the toilet tank regularly for cracks. If you see a crack, have it repaired or replaced as soon as possible.
By following these tips, you can help prevent cracks in your toilet tank and extend its lifespan.
In this article, we have discussed how to fix a crack in a toilet tank. We have provided step-by-step instructions on how to identify the type of crack, remove the tank, repair the crack, and reinstall the tank. We have also provided tips on how to prevent future cracks from occurring.
We hope that this article has been helpful. If you have any questions or concerns, please do not hesitate to contact us.
Author Profile
![Liana Farrell](https://toiletty.com/wp-content/uploads/2023/12/Liana-Farrell-Toiletty.com_-150x150.png)
-
Liana Farrell is the owner of toiletty.com. She is a mom of two and is very passionate about home improvement.
Liana has ten years of home improvement experience, and in her own words, she said: “I love improving the home, and I’m very passionate about keeping the home in the best possible condition. I love it!”
Liana Farrell balances beauty and functionality when she goes about her home improvement jobs.
Latest entries
- January 11, 2024Faucet QueriesHow to Replace a Moen Faucet Cartridge in 6 Steps
- January 11, 2024Faucet QueriesHow to Fix a Leaky Shower Faucet in 5 Easy Steps
- January 11, 2024Faucet QueriesHow to Repair a Moen Bathroom Faucet (Step-by-Step Guide)
- January 11, 2024Faucet QueriesHow to Install a Freestanding Tub Faucet on Concrete: A Step-by-Step Guide