How to Make a Bathtub Accessible for People with Disabilities

AvatarByLiana Farrell Bathtub Queries

How to Make a Bathtub Handicap Accessible

Bathtubs are a necessity for many people, but they can be a challenge for people with disabilities. Fortunately, there are a number of ways to make a bathtub handicap accessible.

In this article, we will discuss the different ways to make a bathtub handicap accessible, including:

  • Installing a bathtub grab bar
  • Raising the height of the bathtub
  • Installing a shower chair
  • Adding a non-slip mat

We will also provide tips on how to choose the right products and make sure that the bathtub is safe for everyone to use.

By following these tips, you can make your bathtub handicap accessible and allow everyone in your home to enjoy a relaxing bath.

Step Action Explanation
1 Install a grab bar on either side of the bathtub. This will provide a secure handhold for people who need to get in and out of the bathtub.
2 Install a non-slip mat in the bottom of the bathtub. This will help to prevent people from slipping and falling in the bathtub.
3 Raise the height of the bathtub by adding a platform or a raised seat. This will make it easier for people to get in and out of the bathtub.
4 Install a shower chair in the bathtub. This will provide a comfortable place for people to sit while they shower.
5 Install a handheld showerhead. This will allow people to control the water flow and temperature more easily.

How To Make A Bathtub Handicap Accessible?

A bathtub is an essential part of any bathroom, but it can be difficult for people with disabilities to use. However, there are a number of things that can be done to make a bathtub handicap accessible, making it easier for everyone to enjoy a relaxing bath.

This guide will walk you through the steps of making a bathtub handicap accessible, from choosing the right bathtub to installing the necessary grab bars. By following these steps, you can create a safe and accessible bathing environment for people of all abilities.

Step 1: Choose the Right Bathtub

The first step in making a bathtub handicap accessible is choosing the right bathtub. There are a number of factors to consider when choosing a bathtub, including the size, shape, and features.

  • Size: The size of the bathtub is important for people with disabilities, as they may need more space to get in and out of the tub. A wider bathtub will provide more room for maneuvering, while a longer bathtub will allow for a more comfortable bathing experience.
  • Shape: The shape of the bathtub is also important to consider. A tub with a built-in seat or a roll-in shower will make it easier for people with disabilities to get in and out of the tub.
  • Features: There are a number of features that can be added to a bathtub to make it more accessible for people with disabilities. These features include grab bars, non-slip surfaces, and a shower seat.

Here are some things to consider when choosing a bathtub for a handicapped person:

  • The size of the bathtub should be wide enough to allow the person to transfer in and out of the tub easily.
  • The tub should have a built-in seat or a roll-in shower to make it easier for the person to get in and out of the tub.
  • The tub should have grab bars on either side to help the person stabilize themselves while getting in and out of the tub.
  • The tub should have a non-slip surface to prevent the person from slipping and falling.

Step 2: Install the Grab Bars

Once you have chosen the right bathtub, the next step is to install the grab bars. Grab bars are an essential safety feature for a handicap accessible bathtub, as they provide support for the person while they are getting in and out of the tub.

  • The grab bars should be installed at least 30 inches apart and 36 inches above the floor. This will allow the person to grab the bars with both hands and provide them with support while they are getting in and out of the tub.
  • The grab bars should be securely fastened to the wall. The grab bars should be able to support the weight of the person without coming loose.
  • The grab bars should be made of a non-slip material. The grab bars should be made of a material that will not slip, even when the person is wet.

Here are some tips for installing grab bars:

  • Choose the right type of grab bar. There are a variety of different types of grab bars available, so you will need to choose the type that is best suited for your needs.
  • Install the grab bars at the right height. The grab bars should be installed at a height that is comfortable for the person to reach.
  • Secure the grab bars to the wall. The grab bars should be securely fastened to the wall so that they do not come loose.

Step 3: Add Other Features

In addition to the grab bars, there are a number of other features that can be added to a bathtub to make it more accessible for people with disabilities. These features include:

  • A shower seat: A shower seat can provide a comfortable place for the person to sit while they are bathing.
  • A non-slip mat: A non-slip mat can help to prevent the person from slipping and falling in the tub.
  • A handheld showerhead: A handheld showerhead can allow the person to control the water flow and temperature.

Here are some tips for adding other features to a bathtub:

  • Choose the right features. The features that you add to the bathtub should be based on the specific needs of the person who will be using the tub.
  • Install the features correctly. The features should be installed correctly so that they are safe and effective.
  • Test the features. After you have installed the features, test them to make sure that they are working properly.

By following these steps, you can create a handicap accessible bathtub that is safe and comfortable for people of all abilities to use.

Additional Resources

  • [The National Association of Home Builders (NAHB) has a number of

Step 3: Add a Seat

A seat can make it easier for the person to get in and out of the bathtub. It can also provide support for the person while they are bathing.

When choosing a seat, consider the following factors:

  • The seat should be made of a non-slip material. This will help to prevent the person from slipping and falling.
  • The seat should be securely fastened to the bathtub. This will help to prevent the seat from tipping over.
  • The seat should be the right height for the person. The person should be able to sit comfortably on the seat and reach the faucets and showerhead.

Here are some tips for installing a seat in your bathtub:

1. Measure the width and depth of your bathtub. This will help you determine the size of the seat you need.
2. Choose a seat that is made of a non-slip material.
3. Secure the seat to the bathtub with screws or bolts. Make sure the screws or bolts are long enough to go through the seat and into the bathtub.
4. Test the seat to make sure it is secure. The person should be able to sit on the seat without it tipping over.

Step 4: Make Sure the Water Temperature is Safe

The water temperature in the bathtub should be between 98 degrees Fahrenheit and 104 degrees Fahrenheit. This is the ideal temperature for bathing and will help to prevent the person from getting burned.

To test the water temperature, use a thermometer. The thermometer should be placed in the water at the level where the person’s body will be. The water temperature should be between 98 degrees Fahrenheit and 104 degrees Fahrenheit.

The person should not leave the bathtub unattended. If the person needs to leave the bathtub, they should turn off the water and drain the bathtub.

Step 5: Provide Grab Bars

Grab bars can help the person to get in and out of the bathtub safely. They can also provide support for the person while they are bathing.

When choosing grab bars, consider the following factors:

  • The grab bars should be made of a sturdy material.
  • The grab bars should be securely fastened to the wall.
  • The grab bars should be at the right height for the person. The person should be able to reach the grab bars without straining.

Here are some tips for installing grab bars in your bathtub:

1. Measure the width and depth of your bathtub. This will help you determine the number and location of grab bars you need.
2. Choose grab bars that are made of a sturdy material.
3. Secure the grab bars to the wall with screws or bolts. Make sure the screws or bolts are long enough to go through the grab bar and into the wall.
4. Test the grab bars to make sure they are secure. The person should be able to hold on to the grab bars without them slipping or coming loose.

Step 6: Install a Shower Chair

A shower chair can make it easier for the person to shower. It can also provide support for the person while they are showering.

When choosing a shower chair, consider the following factors:

  • The shower chair should be made of a non-slip material. This will help to prevent the person from slipping and falling.
  • The shower chair should be lightweight and easy to move.
  • The shower chair should be the right height for the person. The person should be able to sit comfortably on the chair and reach the showerhead.

Here are some tips for installing a shower chair in your bathtub:

1. Measure the width and depth of your bathtub. This will help you determine the size of the shower chair you need.
2. Choose a shower chair that is made of a non-slip material.
3. Place the shower chair in the bathtub. Make sure the shower chair is stable and does not move when the person sits on it.
4. Secure the shower chair to the bathtub with suction cups or straps.

Step 7: Install a Handheld Showerhead

A handheld showerhead can make it easier for the person to wash themselves. It can also provide more flexibility for the person to reach different parts of their body.

When choosing a handheld showerhead, consider the following factors:

  • The handheld showerhead should be lightweight and easy to use.
  • The handheld showerhead should have a variety of spray settings.
  • The handheld showerhead should be the right height for the person. The person should be able to reach the showerhead without straining.

Here are some tips for installing a handheld showerhead in your bathtub:

1.

How do I make a bathtub handicap accessible?

There are a few things you can do to make a bathtub handicap accessible.

  • Install a grab bar on either side of the tub. This will help the person get in and out of the tub safely.
  • Install a non-slip mat in the bottom of the tub. This will prevent the person from slipping and falling.
  • Raise the height of the tub by installing a platform or a raised toilet seat. This will make it easier for the person to get in and out of the tub.
  • Install a hand-held shower head. This will allow the person to shower without having to reach over the side of the tub.
  • Install a shower chair. This will give the person a place to sit while they shower.

What are the different types of grab bars?

There are two main types of grab bars: wall-mounted grab bars and floor-mounted grab bars.

  • Wall-mounted grab bars are installed on the wall next to the bathtub. They are typically made of stainless steel or aluminum.
  • Floor-mounted grab bars are installed on the floor next to the bathtub. They are typically made of rubber or plastic.

The type of grab bar you choose will depend on your specific needs and preferences.

How do I install a grab bar?

Installing a grab bar is a relatively simple project that can be completed in a few hours.

To install a wall-mounted grab bar, you will need:

  • A stud finder
  • A drill
  • A screwdriver
  • A level
  • A measuring tape
  • A hacksaw
  • A hole saw
  • A sealant
  • The grab bar of your choice

1. Locate the studs in the wall. Use a stud finder to find the studs behind the wall where you want to install the grab bar.
2. Mark the location of the grab bar on the wall. Use a level to make sure the mark is straight.
3. Drill holes in the wall. Drill holes in the wall where you marked the location of the grab bar. The holes should be deep enough to accommodate the screws that come with the grab bar.
4. Insert the screws into the holes. Insert the screws into the holes in the wall. Make sure the screws are tight enough to hold the grab bar in place.
5. Seal the holes. Apply a sealant around the screws to prevent water from seeping into the holes.
6. Attach the grab bar to the wall. Attach the grab bar to the wall using the screws.

To install a floor-mounted grab bar, you will need:

  • A level
  • A measuring tape
  • A pencil
  • A drill
  • A screwdriver
  • A saw
  • A sealant
  • The grab bar of your choice

1. Locate the studs in the floor. Use a stud finder to find the studs under the floor where you want to install the grab bar.
2. Mark the location of the grab bar on the floor. Use a level to make sure the mark is straight.
3. Drill holes in the floor. Drill holes in the floor where you marked the location of the grab bar. The holes should be deep enough to accommodate the screws that come with the grab bar.
4. Insert the screws into the holes. Insert the screws into the holes in the floor. Make sure the screws are tight enough to hold the grab bar in place.
5. Seal the holes. Apply a sealant around the screws to prevent water from seeping into the holes.
6. Attach the grab bar to the floor. Attach the grab bar to the floor using the screws.

What are the different types of non-slip mats?

There are two main types of non-slip mats: textured mats and suction mats.

  • Textured mats have a raised surface that helps to prevent slipping. They are typically made of rubber or plastic.
  • Suction mats have a suction cup backing that helps to keep them in place. They are typically made of rubber or silicone.

The type of non-slip mat you choose will depend on your specific needs and preferences.

How do I install a non-slip mat in a bathtub?

Installing a non-slip mat in a bathtub is a relatively simple project that can be completed in a few minutes.

To install a textured mat, you will need:

  • A non-slip mat
  • A measuring tape
  • A pencil
  • A utility knife

1

In this blog post, we have discussed how to make a bathtub handicap accessible. We have covered a variety of topics, including:

  • The different types of handicap accessibility features that can be added to a bathtub
  • The importance of consulting with a professional before making any modifications to your bathtub
  • The steps involved in making a bathtub handicap accessible

We hope that this information has been helpful and that you are now able to make your bathtub more accessible for people with disabilities.

Author Profile

Liana Farrell
Liana Farrell
Liana Farrell is the owner of toiletty.com. She is a mom of two and is very passionate about home improvement.

Liana has ten years of home improvement experience, and in her own words, she said: “I love improving the home, and I’m very passionate about keeping the home in the best possible condition. I love it!”

Liana Farrell balances beauty and functionality when she goes about her home improvement jobs.