How to Install Vinyl Flooring in Bathroom Without Removing Toilet

AvatarByLiana Farrell Toilet Queries

Installing vinyl flooring in your bathroom is a great way to update your space without breaking the bank. It’s a relatively easy project that can be completed in a weekend, and it’s a great way to add some style and personality to your bathroom.

In this article, we’ll walk you through the steps of installing vinyl flooring in your bathroom without removing the toilet. We’ll provide you with all the information you need to know, including the tools and materials you’ll need, as well as step-by-step instructions.

So if you’re ready to give your bathroom a makeover, read on!

Step Instructions Image
1 Prepare the subfloor by removing any old flooring and leveling any uneven areas. Image of a subfloor being prepared for vinyl flooring
2 Install a moisture barrier underlayment over the subfloor. Image of a moisture barrier underlayment being installed
3 Cut the vinyl planks to size and install them starting in the farthest corner of the bathroom. Image of vinyl planks being installed in a bathroom
4 Use a utility knife to trim the vinyl planks around the toilet and other fixtures. Image of vinyl planks being trimmed around a toilet
5 Seal the seams between the vinyl planks with a vinyl floor sealant. Image of a vinyl floor sealant being applied

How to Install Vinyl Flooring in Bathroom Without Removing Toilet?

Vinyl flooring is a popular choice for bathrooms because it is durable, water-resistant, and easy to clean. However, installing vinyl flooring in a bathroom can be a challenge if you don’t want to remove the toilet. In this guide, we will show you how to install vinyl flooring in a bathroom without removing the toilet.

Preparation

Before you can start installing the vinyl flooring, you need to prepare the subfloor. This involves removing any old flooring, repairing any damage to the subfloor, and applying a moisture barrier.

1. Remove the old flooring.

If you have old flooring in your bathroom, you will need to remove it before you can install the vinyl flooring. To do this, you will need a pry bar, a hammer, and a utility knife.

First, use the pry bar to pry up the edges of the old flooring. Once you have pried up the edges, you can use the hammer to break the old flooring into smaller pieces. Be careful not to damage the subfloor.

Once you have removed all of the old flooring, you will need to sweep up the debris.

2. Repair any damage to the subfloor.

Once you have removed the old flooring, you will need to repair any damage to the subfloor. This may include cracks, holes, or uneven areas.

To repair cracks and holes, you can use a patching compound. To repair uneven areas, you can use a self-leveling compound.

3. Apply a moisture barrier.

Once you have repaired any damage to the subfloor, you will need to apply a moisture barrier. This will help to protect the subfloor from moisture damage.

You can apply a moisture barrier by using a roll of polyethylene sheeting. Cut the sheeting to fit the subfloor, and then lay it down. Make sure that the sheeting overlaps at the seams.

Secure the sheeting to the subfloor with a staple gun.

Installation

Now that you have prepared the subfloor, you can start installing the vinyl flooring.

1. Install the underlayment.

The underlayment is a layer of material that is installed between the subfloor and the vinyl flooring. It helps to protect the vinyl flooring from moisture and provides a cushion for your feet.

You can install the underlayment by using a roll of 1/4-inch thick foam underlayment. Cut the underlayment to fit the subfloor, and then lay it down. Make sure that the underlayment overlaps at the seams.

Secure the underlayment to the subfloor with a staple gun.

2. Install the vinyl flooring tiles.

Now you can start installing the vinyl flooring tiles.

First, measure the area where you will be installing the tiles. Then, cut the tiles to size.

To install the tiles, you will need a flooring adhesive and a rubber mallet. Apply a thin layer of adhesive to the subfloor, and then press the tiles into place. Use the rubber mallet to tap the tiles into place.

Continue installing the tiles until you have covered the entire area.

3. Seal the tiles.

Once you have installed all of the tiles, you will need to seal them. This will help to protect the tiles from moisture and wear and tear.

You can seal the tiles by using a can of vinyl floor sealant. Apply the sealant to the tiles, and then allow it to dry according to the manufacturer’s instructions.

Installing vinyl flooring in a bathroom without removing the toilet is a relatively simple process. By following the steps in this guide, you can install beautiful and durable vinyl flooring in your bathroom without having to disrupt your plumbing.

Here are some additional tips for installing vinyl flooring in a bathroom:

  • Use a sharp utility knife to cut the tiles. A dull knife will make it difficult to get a clean cut, and you may end up damaging the tiles.
  • Make sure that the tiles are properly aligned. If the tiles are not aligned, they will look uneven and unprofessional.
  • Use a grout roller to apply the grout. This will help to create a smooth and even grout line.
  • Seal the tiles after you have installed them. This will help to protect the tiles from moisture and wear and tear.

By following these tips, you can install beautiful and durable vinyl flooring in your bathroom without having to remove the toilet.

3. Finishing Touches

Once the vinyl flooring is installed, you can put the toilet back on the new flange. Make sure to tighten the bolts securely so that the toilet is stable.

You can also add any final touches, such as trim or molding. This will help to protect the vinyl flooring and make it look more finished.

4. Maintenance

To keep your vinyl flooring in good condition, it is important to keep it clean and dry. You should sweep or vacuum the floor regularly and mop it with a mild detergent. If the floor gets wet, be sure to dry it off immediately.

You should also repair any damage to the vinyl flooring as soon as possible. This will help to prevent the damage from getting worse and it will also help to keep the floor looking its best.

If you need to replace a vinyl flooring tile, you can do so by following these steps:

1. Remove the damaged tile.
2. Cut a new tile to the same size as the damaged tile.
3. Apply adhesive to the back of the new tile and press it into place.
4. Allow the adhesive to dry completely.

Installing vinyl flooring in a bathroom without removing the toilet is a relatively simple process. By following these steps, you can install a new floor that will look great and last for years to come.

How do I install vinyl flooring in my bathroom without removing the toilet?

There are a few different ways to install vinyl flooring in your bathroom without removing the toilet. Here are two methods:

Method 1: Installing Vinyl Flooring Over Existing Tile

1. Measure the area where you will be installing the vinyl flooring. Be sure to add 1 inch to all measurements to allow for expansion and contraction.
2. Cut the vinyl flooring to size. Use a utility knife or a flooring saw to cut the vinyl flooring to the desired size.
3. Apply a thin layer of adhesive to the back of the vinyl flooring. Be sure to follow the manufacturer’s instructions for the specific adhesive you are using.
4. Place the vinyl flooring over the existing tile. Start in the center of the room and work your way out. Use a rubber mallet to tap the vinyl flooring into place.
5. Use a utility knife or a flooring saw to trim the excess vinyl flooring. Be sure to cut the vinyl flooring flush with the walls.
6. Apply a sealant around the edges of the vinyl flooring. This will help to prevent water from seeping underneath the flooring.

Method 2: Installing Vinyl Flooring Over Subflooring

1. Remove the toilet. Follow the manufacturer’s instructions for removing your toilet.
2. Install a moisture barrier under the subflooring. This will help to protect the subflooring from moisture damage.
3. Install the subflooring. Use 1-inch thick plywood subflooring. Be sure to install the subflooring perpendicular to the direction of the vinyl flooring.
4. Install the vinyl flooring. Follow the steps above for installing vinyl flooring over existing tile.

Which method is better?

The best method for installing vinyl flooring in your bathroom without removing the toilet depends on the condition of your existing floor. If your existing floor is in good condition, you can install vinyl flooring over the existing tile. If your existing floor is damaged or uneven, you will need to install a moisture barrier and subflooring before installing the vinyl flooring.

What tools do I need?

You will need the following tools to install vinyl flooring in your bathroom without removing the toilet:

  • Utility knife or flooring saw
  • Tape measure
  • Pencil
  • Level
  • Combination square
  • Sander
  • Sander paper
  • Safety glasses
  • Gloves
  • Adhesive
  • Sealant
  • Rubber mallet

How much does it cost to install vinyl flooring in my bathroom?

The cost of installing vinyl flooring in your bathroom will vary depending on the size of the room, the type of vinyl flooring you choose, and the cost of labor. The average cost to install vinyl flooring in a bathroom is between $1,000 and $2,000.

How long does it take to install vinyl flooring in my bathroom?

The amount of time it takes to install vinyl flooring in your bathroom will vary depending on the size of the room and the type of vinyl flooring you choose. The average time to install vinyl flooring in a bathroom is between 2 and 4 days.

What are the benefits of installing vinyl flooring in my bathroom?

Vinyl flooring is a popular choice for bathrooms because it is durable, water-resistant, and easy to clean. Vinyl flooring is also available in a variety of styles and colors, so you can find the perfect option for your bathroom.

What are the drawbacks of installing vinyl flooring in my bathroom?

Vinyl flooring is not as durable as other types of flooring, such as hardwood or tile. Vinyl flooring can also be damaged by heat and moisture.

Can I install vinyl flooring myself?

Yes, you can install vinyl flooring yourself. However, it is important to follow the manufacturer’s instructions carefully to ensure that the installation is done correctly. If you are not comfortable installing vinyl flooring yourself, you can hire a professional to do the job for you.

Installing vinyl flooring in a bathroom without removing the toilet is a relatively simple process, but it does require some careful planning and preparation. By following the steps outlined in this guide, you can successfully install vinyl flooring in your bathroom without having to remove the toilet.

Here are the key takeaways from this guide:

  • Before you begin, make sure to measure your bathroom and purchase enough vinyl flooring to cover the entire area.
  • Remove the toilet seat and any other fixtures that may be in the way.
  • Apply a moisture-resistant underlayment to the subfloor.
  • Install the vinyl flooring according to the manufacturer’s instructions.
  • Be sure to seal the edges of the vinyl flooring to prevent water damage.

By following these steps, you can install vinyl flooring in your bathroom without having to remove the toilet. This is a great option for homeowners who want to update the look of their bathroom without having to deal with the hassle of removing and reinstalling the toilet.

Author Profile

Liana Farrell
Liana Farrell
Liana Farrell is the owner of toiletty.com. She is a mom of two and is very passionate about home improvement.

Liana has ten years of home improvement experience, and in her own words, she said: “I love improving the home, and I’m very passionate about keeping the home in the best possible condition. I love it!”

Liana Farrell balances beauty and functionality when she goes about her home improvement jobs.