How To Replace The Flush Handle On A Toilet?

AvatarByLiana Farrell Toilet Queries

How to Replace a Toilet Flush Handle

Your toilet flush handle is one of the most important parts of your toilet. It’s what you use to flush the toilet, after all. But what happens when the flush handle breaks? Or if you just want to give your bathroom a makeover?

Replacing a toilet flush handle is a relatively simple task that you can do yourself in just a few minutes. In this article, we’ll walk you through the steps of replacing a toilet flush handle, so you can have a working toilet in no time.

We’ll cover everything you need to know, from gathering the necessary tools and materials to removing the old handle and installing the new one. So whether you’re a DIY novice or a seasoned pro, read on for all the information you need to know about replacing a toilet flush handle.

Step Tools Instructions
1 Pliers Turn off the water supply to the toilet.
2 Adjustable wrench Loosen the nuts that hold the flush handle in place.
3 Screwdriver Remove the old flush handle.
4 New flush handle Install the new flush handle.
5 Pliers Tighten the nuts that hold the flush handle in place.
6 Adjustable wrench Turn on the water supply to the toilet.

How to Replace the Flush Handle on a Toilet

Tools and Materials Needed

To replace the flush handle on a toilet, you will need the following tools and materials:

  • A Phillips head screwdriver
  • A flathead screwdriver
  • A new flush handle
  • Plumbing putty
  • Penetrating oil
  • Rags

Step-by-Step Instructions

1. Turn off the water supply to the toilet. This is usually located under the sink or in the basement.
2. Flush the toilet to drain the water from the tank.
3. Remove the old flush handle. There are two screws that hold the flush handle in place. One screw is located on the top of the handle, and the other screw is located on the bottom. Use a Phillips head screwdriver to remove the screws.
4. Remove the old gasket. The gasket is a rubber ring that seals the flush handle to the tank. It is located between the flush handle and the tank. Use a flathead screwdriver to pry the gasket loose.
5. Apply a small amount of plumbing putty to the new gasket. This will help to create a watertight seal.
6. Install the new flush handle. Align the new flush handle with the holes in the tank. Insert the screws through the holes and tighten them with a Phillips head screwdriver.
7. Turn on the water supply to the toilet. Flush the toilet to test the new flush handle.

Troubleshooting

If the new flush handle does not work properly, there may be a problem with the flapper valve. The flapper valve is a rubber disk that seals the opening to the drain when the toilet is flushed. If the flapper valve is not sealing properly, water will leak into the bowl and the toilet will not flush properly.

To check the flapper valve, remove the lid from the toilet tank. The flapper valve is located at the bottom of the tank. It is a round, rubber disk with a metal rod attached to it.

To replace the flapper valve, you will need a new flapper valve and a pair of pliers.

1. Turn off the water supply to the toilet.
2. Flush the toilet to drain the water from the tank.
3. Remove the old flapper valve. Use the pliers to grasp the metal rod and pull the flapper valve out of the tank.
4. Install the new flapper valve. Align the new flapper valve with the hole in the tank. Insert the metal rod through the hole and into the flapper valve.
5. Turn on the water supply to the toilet. Flush the toilet to test the new flapper valve.

Replacing the flush handle on a toilet is a relatively simple task that can be completed in a few minutes. By following these instructions, you can easily fix a broken flush handle and restore your toilet to working order.

How To Replace The Flush Handle On A Toilet?

Replacing the flush handle on a toilet is a relatively simple task that can be completed in a few minutes. Here are the steps involved:

1. Turn off the water supply to the toilet. This can be done by turning the shut-off valve located under the sink or behind the toilet clockwise until it is tight.
2. Remove the old flush handle. To do this, you will need to first remove the cap that covers the bolt that holds the handle in place. This cap is usually located on the back of the handle. Once the cap is removed, you can use a screwdriver to loosen the bolt and remove the handle.
3. Install the new flush handle. To install the new handle, simply reverse the steps you took to remove the old handle. Make sure that the new handle is aligned correctly with the toilet bowl before tightening the bolt.
4. Turn on the water supply to the toilet. Once the new handle is installed, you can turn the water supply back on. Flush the toilet to make sure that the new handle is working properly.

Troubleshooting

If you are having trouble replacing the flush handle on your toilet, here are a few troubleshooting tips:

  • Make sure that you have the right tools for the job. You will need a screwdriver and a pair of pliers.
  • If the old handle is stuck, you can try using a penetrating oil to loosen it.
  • If the new handle is not aligned correctly, you can try adjusting it until it is.
  • If the new handle is not working properly, you may need to replace it with a different model.

Additional Tips

Here are a few additional tips for replacing the flush handle on a toilet:

  • If you are not comfortable working with plumbing, you may want to hire a professional to do the job for you.
  • Make sure that you have the right replacement part for your toilet. The flush handle you need will depend on the make and model of your toilet.
  • Take your time and follow the instructions carefully. Replacing the flush handle on a toilet is a simple task, but it is important to do it correctly.

Replacing the flush handle on a toilet is a relatively simple task that can be completed in a few minutes. By following the steps in this guide, you can easily replace your old flush handle with a new one.

How to Replace a Toilet Flush Handle

Q: What tools do I need to replace a toilet flush handle?

A: You will need a screwdriver, a pair of pliers, and a new toilet flush handle.

Q: How do I remove the old flush handle?

A: 1. Turn off the water supply to the toilet.
2. Locate the two screws that hold the flush handle in place.
3. Use a screwdriver to loosen the screws and remove the flush handle.
4. If the screws are stuck, you can use a pair of pliers to grip the head of the screw and turn it.

Q: How do I install the new flush handle?

A: 1. Align the new flush handle with the mounting holes in the toilet.
2. Insert the screws through the holes in the flush handle and into the toilet.
3. Tighten the screws until the flush handle is secure.

Q: What if the new flush handle doesn’t fit?

A: If the new flush handle doesn’t fit, you may need to purchase a different model. Make sure to measure the old flush handle before you go shopping so you can get a replacement that is the same size.

Q: What if the water keeps running after I flush the toilet?

A: If the water keeps running after you flush the toilet, it is likely that the flush valve is not sealing properly. You can try to fix this by adjusting the flush valve or by replacing it. If you are unable to fix the problem, you may need to call a plumber.

In this blog post, we have discussed how to replace a toilet flush handle. We have provided step-by-step instructions, as well as tips and tricks to make the process easier. We hope that this information has been helpful, and that you are now able to replace your toilet flush handle with confidence.

Here are some key takeaways from this blog post:

  • Before you begin, make sure you have the necessary tools and materials.
  • Turn off the water supply to the toilet before you start work.
  • Remove the old flush handle by unscrewing the nuts that hold it in place.
  • Install the new flush handle by reversing the steps you took to remove the old one.
  • Be sure to test the new flush handle to make sure it is working properly.

Replacing a toilet flush handle is a relatively simple task that can be completed in a matter of minutes. By following the steps in this blog post, you can easily save yourself a trip to the hardware store and get your toilet back in working order in no time.

Author Profile

Liana Farrell
Liana Farrell
Liana Farrell is the owner of toiletty.com. She is a mom of two and is very passionate about home improvement.

Liana has ten years of home improvement experience, and in her own words, she said: “I love improving the home, and I’m very passionate about keeping the home in the best possible condition. I love it!”

Liana Farrell balances beauty and functionality when she goes about her home improvement jobs.