How to Replace Your Pur Water Filter Faucet in 5 Easy Steps

AvatarByLiana Farrell Faucet Queries

How to Replace a Pur Water Filter Faucet

If you’re looking for a way to improve the taste and quality of your tap water, a Pur water filter faucet is a great option. Pur faucet filters remove impurities like chlorine, lead, and sediment, leaving you with clean, refreshing water that tastes great.

Replacing a Pur water filter faucet is a relatively simple process, and it can be done in just a few minutes. In this article, we’ll walk you through the steps of replacing your Pur water filter faucet, so you can enjoy fresh, filtered water in no time.

What You’ll Need

To replace your Pur water filter faucet, you’ll need the following materials:

  • A new Pur water filter faucet
  • A Phillips head screwdriver
  • A wrench
  • A bucket
  • Paper towels

Step-by-Step Instructions

1. Turn off the water supply to the faucet.
2. Remove the old faucet by unscrewing the mounting screws.
3. Place a bucket underneath the faucet to catch any water that may spill.
4. Remove the old filter cartridge by unscrewing it counterclockwise.
5. Wipe down the inside of the faucet housing with a paper towel.
6. Insert the new filter cartridge into the faucet housing and screw it clockwise until it’s tight.
7. Reattach the faucet to the water supply and turn on the water.
8. Test the faucet to make sure it’s working properly.

Step Instructions Image
1 Turn off the water supply to the faucet.
2 Remove the old filter cartridge by turning it counterclockwise.
3 Insert the new filter cartridge into the faucet, turning it clockwise until it is snug.
4 Turn on the water supply to the faucet.

A Pur water filter faucet is a great way to improve the quality of your drinking water. It removes impurities such as chlorine, lead, and sediment, and it can also add minerals like calcium and magnesium. However, over time, the filter cartridge will become clogged with contaminants, and it will need to be replaced.

This guide will show you how to replace the filter cartridge in a Pur water filter faucet. It’s a simple process that can be completed in just a few minutes.

Gather the necessary tools and materials.

  • Pur water filter faucet
  • Replacement filter cartridge
  • Adjustable wrench
  • Pliers
  • Penetrating oil
  • Paper towels
  • Rag

Turn off the water supply to the faucet.

1. Locate the shut-off valve for the faucet. It is usually located on the cold water supply line, near the faucet.
2. Turn the valve to the off position. This will stop the flow of water to the faucet.

Remove the old filter cartridge.

1. Use the adjustable wrench to loosen the locknut on the bottom of the faucet.
2. Pull the old filter cartridge out of the faucet.
3. Use the pliers to remove the rubber gasket from the bottom of the filter cartridge.

Install the new filter cartridge.

1. Place the new filter cartridge into the faucet.
2. Apply a small amount of penetrating oil to the rubber gasket.
3. Insert the gasket into the bottom of the filter cartridge.
4. Tighten the locknut on the bottom of the faucet.

Turn on the water supply to the faucet.

1. Turn the shut-off valve to the on position.
2. Allow the water to run for a few minutes to flush out any debris.
3. Test the faucet to make sure it is working properly.

Replacing the filter cartridge in a Pur water filter faucet is a simple process that can be completed in just a few minutes. By following these steps, you can ensure that your faucet is providing you with clean, filtered water.

Here are some additional tips for replacing the filter cartridge in a Pur water filter faucet:

  • Make sure to purchase a genuine Pur replacement filter cartridge.
  • Read the instructions carefully before you begin.
  • If you have any difficulty, contact Pur customer support for assistance.

By following these tips, you can easily and safely replace the filter cartridge in your Pur water filter faucet.

How To Replace Pur Water Filter Faucet?

Pur water filter faucets are a great way to improve the taste and quality of your tap water. However, over time, the filter cartridge will need to be replaced. This is a relatively simple process, but it is important to follow the steps carefully to avoid damaging the faucet.

3.Remove the old filter cartridge.

To remove the old filter cartridge, you will need to:

1. Turn off the water supply to the faucet.
2. Locate the locking nut on the bottom of the faucet.
3. Use a wrench to loosen the locking nut.
4. Pull the old filter cartridge out of the faucet.

4.Install the new filter cartridge.

To install the new filter cartridge, you will need to:

1. Insert the new filter cartridge into the faucet.
2. Tighten the locking nut on the bottom of the faucet.
3. Turn on the water supply to the faucet.

Replacing the filter cartridge in your Pur water filter faucet is a simple process that can be completed in just a few minutes. By following these steps, you can ensure that your faucet is properly maintained and that you are always enjoying fresh, clean water.

Here are some additional tips for replacing your Pur water filter faucet:

  • Make sure that the new filter cartridge is compatible with your faucet.
  • Read the instructions carefully before you begin the replacement process.
  • If you are having trouble replacing the filter cartridge, contact the manufacturer for assistance.

By following these tips, you can easily replace the filter cartridge in your Pur water filter faucet and keep your water tasting fresh and clean.

How do I know when to replace my Pur water filter faucet?

  • Your water flow rate may decrease.
  • Your water may become cloudy or discolored.
  • Your water may have a strange taste or odor.
  • The filter indicator light may turn red.

How do I remove the old filter?

1. Turn off the water supply to the faucet.
2. Locate the filter housing on the bottom of the faucet.
3. Twist the filter housing counterclockwise to remove it.
4. Discard the old filter.

How do I install the new filter?

1. Rinse the new filter under cold water.
2. Insert the new filter into the filter housing.
3. Twist the filter housing clockwise to secure it.
4. Turn on the water supply to the faucet.

What if the water is still cloudy or discolored after I replace the filter?

1. Make sure that the filter is installed correctly.
2. Check the water pressure to make sure that it is not too low.
3. Flush the faucet by running it for several minutes.
4. If the water is still cloudy or discolored, you may need to replace the filter again.

**How often should I replace my Pur water filter faucet?

The Pur water filter faucet should be replaced every 6 months or as needed.

**Where can I buy a replacement filter for my Pur water filter faucet?

You can purchase a replacement filter for your Pur water filter faucet at most major retailers. You can also purchase a replacement filter online from the Pur website.

In this article, we have discussed how to replace a Pur water filter faucet. We have covered the steps involved in the process, as well as some tips and tricks to make the job easier. We hope that this information has been helpful, and that you are now able to replace your Pur water filter faucet with confidence.

Here are some key takeaways from this article:

  • Before you begin, make sure you have all of the necessary tools and materials.
  • Turn off the water supply to the faucet before you start.
  • Remove the old faucet by unscrewing the mounting nuts.
  • Install the new faucet by following the manufacturer’s instructions.
  • Turn on the water supply and test the faucet to make sure it is working properly.

By following these steps, you can easily replace your Pur water filter faucet and enjoy fresh, clean water for years to come.

Author Profile

Liana Farrell
Liana Farrell
Liana Farrell is the owner of toiletty.com. She is a mom of two and is very passionate about home improvement.

Liana has ten years of home improvement experience, and in her own words, she said: “I love improving the home, and I’m very passionate about keeping the home in the best possible condition. I love it!”

Liana Farrell balances beauty and functionality when she goes about her home improvement jobs.