How to Replace a Woodford Model 17 Faucet

AvatarByLiana Farrell Faucet Queries

How to Replace a Woodford Model 17 Faucet

Your Woodford Model 17 faucet is a workhorse, but it’s not invincible. Over time, it may start to leak or malfunction. If this happens, you may need to replace it. Replacing a faucet is a relatively simple task, but it does require some basic tools and know-how. In this article, we’ll walk you through the process of replacing a Woodford Model 17 faucet step-by-step.

We’ll start by discussing the tools and materials you’ll need. Then, we’ll walk you through the steps of removing the old faucet, installing the new faucet, and testing it to make sure it’s working properly. By the end of this article, you’ll be able to replace your Woodford Model 17 faucet like a pro.

Step Tools Instructions
1 Adjustable wrench Turn off the water supply to the faucet.
2 Pliers Remove the old faucet handles.
3 Screwdriver Remove the old faucet body.
4 New faucet Install the new faucet body.
5 Faucet handles Install the new faucet handles.
6 Turn on the water supply to the faucet. Test the faucet to make sure it is working properly.

How to Replace a Woodford Model 17 Faucet

This guide will show you how to replace a Woodford Model 17 faucet. This type of faucet is a popular choice for kitchens and bathrooms because it is durable and easy to maintain. However, over time, the faucet may start to leak or malfunction. If this happens, you can usually fix the problem by replacing the faucet.

Replacing a Woodford Model 17 faucet is a relatively simple task that can be completed in about an hour. However, it is important to follow the steps carefully to avoid damaging the faucet or the plumbing.

Gather the necessary tools and materials

Before you begin, gather the following tools and materials:

  • Adjustable wrench
  • Pliers
  • Penetrating oil
  • Replacement faucet
  • New O-rings and gaskets
  • Plumbing tape

Turn off the water supply

The first step is to turn off the water supply to the faucet. This will prevent any water from spilling out when you remove the old faucet.

To turn off the water supply, locate the water supply valves under the sink. These valves are usually located on the hot and cold water lines. Turn the valves clockwise to turn off the water.

Remove the old faucet

Now that the water supply is turned off, you can begin to remove the old faucet.

First, use the adjustable wrench to loosen the nuts that connect the faucet to the water supply lines. Once the nuts are loose, you can use the pliers to remove the faucet handles.

Next, use the adjustable wrench to loosen the nuts that connect the faucet to the sink. Once the nuts are loose, you can carefully remove the faucet from the sink.

Install the new faucet

Now that the old faucet is removed, you can install the new faucet.

First, apply a small amount of penetrating oil to the threads of the new faucet. This will help to make it easier to install the faucet.

Next, align the new faucet with the sink and attach it to the water supply lines. Use the adjustable wrench to tighten the nuts that connect the faucet to the water supply lines.

Once the faucet is connected to the water supply lines, you can attach it to the sink. Use the adjustable wrench to tighten the nuts that connect the faucet to the sink.

Test the faucet

Now that the new faucet is installed, you can test it to make sure it is working properly.

Turn on the water supply valves and turn on the faucet. The faucet should start to flow water. Check for any leaks around the faucet. If there are no leaks, the faucet is installed correctly.

Replacing a Woodford Model 17 faucet is a relatively simple task that can be completed in about an hour. By following these steps, you can easily replace your old faucet with a new one.

Here are some additional tips for replacing a Woodford Model 17 faucet:

  • If the faucet is stuck, you can try using a penetrating oil to loosen it.
  • Be careful not to damage the sink or the faucet when you are removing the old faucet.
  • Make sure that the new faucet is compatible with your sink.
  • Tighten the nuts that connect the faucet to the water supply lines and the sink securely.
  • Test the faucet to make sure it is working properly.

3. Remove the old faucet

To remove the old faucet, you will need:

  • A wrench
  • A screwdriver
  • A bucket
  • Penetrating oil

1. Turn off the water supply to the faucet.
2. Disconnect the water supply lines from the faucet.
3. Loosen the nuts that hold the faucet in place.
4. Remove the faucet handle(s).
5. Remove the faucet body.

6. If the faucet is stuck, you can use a penetrating oil to loosen it. Apply the oil to the threads of the faucet and let it sit for a few minutes. Then, try to loosen the nuts again.

7. Once the nuts are loose, you can remove the faucet body. Be careful not to drop the faucet body into the sink.

8. Place the old faucet in the bucket.

4. Install the new faucet

To install the new faucet, you will need:

  • A new faucet
  • A wrench
  • A screwdriver
  • A bucket
  • Plumber’s tape

1. Apply a thin layer of plumber’s tape to the threads of the new faucet.
2. Insert the faucet body into the sink.
3. Tighten the nuts that hold the faucet in place.
4. Replace the faucet handle(s).

5. Turn on the water supply to the faucet.

6. Check for leaks.

7. If there are no leaks, you have successfully installed the new faucet.

Replacing a faucet is a relatively simple task that can be completed in a few hours. By following these steps, you can easily replace your old faucet with a new one.

Q: How do I remove the old faucet?

A: To remove the old faucet, you will need to:

1. Turn off the water supply to the faucet.
2. Remove the escutcheon (the decorative cover around the faucet base) by unscrewing it counterclockwise.
3. Loosen the nuts or screws that hold the faucet to the sink.
4. Pull the faucet straight up and off of the sink.

Q: What tools do I need?

A: You will need the following tools to replace a Woodford Model 17 faucet:

  • A wrench or pliers
  • A screwdriver
  • A basin wrench (optional)

Q: What type of new faucet do I need?

A: You will need a new faucet that is compatible with your sink. Most Woodford Model 17 faucets are compatible with standard 1-1/4 inch (32mm) threaded faucet stems.

Q: How do I install the new faucet?

A: To install the new faucet, you will need to:

1. Clean the threads on the faucet and the sink.
2. Apply a thin layer of plumber’s putty to the threads of the faucet.
3. Insert the faucet into the sink and tighten the nuts or screws that hold it in place.
4. Replace the escutcheon.
5. Turn on the water supply to the faucet and check for leaks.

Q: What if I have a problem?

A: If you have a problem installing your new faucet, you can contact the manufacturer or a qualified plumber for assistance.

In this blog post, we have discussed how to replace a Woodford Model 17 faucet. We have provided step-by-step instructions, as well as images and videos to help you understand the process. We hope that this information has been helpful, and that you are now able to replace your Woodford Model 17 faucet with confidence.

Here are the key takeaways from this blog post:

  • Before you begin, make sure you have the proper tools and materials.
  • Turn off the water supply to the faucet.
  • Remove the old faucet by unscrewing the nuts that hold it in place.
  • Install the new faucet by reversing the steps for removing the old faucet.
  • Turn on the water supply and test the faucet to make sure it is working properly.

We hope that this blog post has been helpful. If you have any questions, please feel free to leave a comment below.

Author Profile

Liana Farrell
Liana Farrell
Liana Farrell is the owner of toiletty.com. She is a mom of two and is very passionate about home improvement.

Liana has ten years of home improvement experience, and in her own words, she said: “I love improving the home, and I’m very passionate about keeping the home in the best possible condition. I love it!”

Liana Farrell balances beauty and functionality when she goes about her home improvement jobs.