How to Replace a Tub Faucet Spout in 5 Easy Steps

AvatarByLiana Farrell Faucet Queries

How to Replace a Tub Faucet Spout

Your tub faucet spout is a critical part of your bathroom, and it can quickly become damaged or worn out. If your spout is leaking, dripping, or simply not working properly, it’s time to replace it. Replacing a tub faucet spout is a relatively simple DIY project that can be completed in just a few steps.

In this article, we’ll walk you through the process of replacing a tub faucet spout, from start to finish. We’ll provide step-by-step instructions, helpful tips, and important safety information. By the end of this article, you’ll be able to replace your tub faucet spout like a pro.

So, if your tub faucet spout is giving you trouble, don’t delay. Read on to learn how to replace it!

Step Tools Instructions
1. Turn off the water supply to the tub faucet. – Adjustable wrench – Penetrating oil
2. Remove the old spout by unscrewing the nuts that hold it in place. – Pliers – Rag
3. Apply penetrating oil to the threads of the new spout and let it sit for a few minutes. – New spout – Plumbing tape
4. Thread the new spout onto the faucet body and tighten the nuts until it is secure. – Pipe wrench – Turn on the water supply to the tub faucet and check for leaks.

Tools and Materials Needed

To replace a tub faucet spout, you will need the following tools and materials:

  • A basin wrench
  • A screwdriver
  • A pair of pliers
  • A new tub faucet spout
  • Plumbing tape
  • Silicone sealant

Steps to Remove the Old Faucet Spout

1. Turn off the water supply to the faucet.
2. Disconnect the hot and cold water supply lines from the faucet.
3. Remove the screws that hold the faucet spout in place.
4. Use a basin wrench to loosen the nut that connects the faucet spout to the faucet body.
5. Pull the faucet spout off of the faucet body.
6. Clean the threads on the faucet body with a rag.

Steps to Install the New Faucet Spout

1. Apply a small amount of plumber’s tape to the threads of the new faucet spout.
2. Slide the faucet spout onto the faucet body.
3. Hand-tighten the nut that connects the faucet spout to the faucet body.
4. Use a basin wrench to tighten the nut until it is snug.
5. Connect the hot and cold water supply lines to the faucet.
6. Turn on the water supply to the faucet.
7. Check for leaks.

Replacing a tub faucet spout is a relatively simple task that can be completed in about 30 minutes. By following these steps, you can easily update the look of your bathroom and improve the functionality of your tub faucet.

Here are some additional tips for replacing a tub faucet spout:

  • If the old faucet spout is stuck, you can try using a penetrating oil to loosen it.
  • Be careful not to overtighten the new faucet spout, as this could damage the threads.
  • If you are not comfortable working with plumbing, you can hire a plumber to replace the faucet spout for you.

3. Steps to Install the New Faucet Spout

Now that you have the new faucet spout in hand, it’s time to install it. Here are the steps involved:

1. Turn off the water supply to the faucet. This is usually located under the sink. You will need to find the shut-off valve and turn it clockwise until it is completely closed.
2. Disconnect the old faucet spout. There are usually two screws that hold the faucet spout in place. Use a screwdriver to loosen these screws and remove the old faucet spout.
3. Install the new faucet spout. Place the new faucet spout over the faucet body and align the holes. Insert the screws and tighten them with a screwdriver.
4. Turn on the water supply to the faucet. Make sure that the new faucet spout is working properly by running water through it.

Once you have installed the new faucet spout, you can enjoy the benefits of a new, stylish faucet.

4. Testing the New Faucet Spout

Once you have installed the new faucet spout, it’s important to test it to make sure that it is working properly. Here are a few things to check:

  • Make sure that the water flows smoothly from the faucet.
  • Make sure that the water temperature is consistent.
  • Make sure that the faucet spout does not leak.

If you find that the new faucet spout is not working properly, you may need to adjust the settings or call a plumber for assistance.

Replacing a tub faucet spout is a relatively simple task that can be completed in a few steps. By following the steps in this guide, you can easily upgrade your bathroom with a new, stylish faucet spout.

How To Replace Tub Faucet Spout?

Q: What tools do I need to replace a tub faucet spout?

A: You will need the following tools:

  • A screwdriver
  • A wrench
  • A pair of pliers
  • A new tub faucet spout

Q: How do I remove the old tub faucet spout?

A: 1. Turn off the water supply to the faucet.
2. Disconnect the hot and cold water supply lines from the back of the faucet.
3. Remove the screws that hold the faucet spout in place.
4. Pull the faucet spout straight out.

Q: How do I install the new tub faucet spout?

A: 1. Apply a thin coat of plumber’s putty to the bottom of the new faucet spout.
2. Insert the spout into the faucet body.
3. Tighten the screws that hold the spout in place.
4. Connect the hot and cold water supply lines to the back of the faucet.
5. Turn on the water supply to the faucet.

Q: What if the faucet spout is stuck?

A: If the faucet spout is stuck, you can try using a penetrating oil to loosen it. Apply the oil to the threads of the spout and let it sit for a few minutes. Then, try to turn the spout again. If it is still stuck, you can try using a wrench to turn it. Be careful not to damage the faucet body.

Q: What if the faucet spout leaks?

A: If the faucet spout is leaking, you can try tightening the screws that hold it in place. If that does not work, you may need to replace the O-ring inside the spout.

Q: How often should I replace my tub faucet spout?

A: You should replace your tub faucet spout every 5 to 10 years. This will help to prevent leaks and keep your faucet working properly.

Replacing a tub faucet spout is a relatively simple task that can be completed in a few steps. By following the steps outlined in this guide, you can easily remove your old spout and install a new one.

Here are the key takeaways from this guide:

  • Before you begin, make sure you have the right tools and materials.
  • Turn off the water supply to the faucet and drain the water from the tub.
  • Remove the old spout by unscrewing the mounting nuts.
  • Clean the mounting surface and apply a sealant to the new spout.
  • Align the new spout with the mounting holes and screw it into place.
  • Turn on the water supply and test the new spout.

By following these steps, you can easily replace your tub faucet spout and give your bathroom a new look.

Author Profile

Liana Farrell
Liana Farrell
Liana Farrell is the owner of toiletty.com. She is a mom of two and is very passionate about home improvement.

Liana has ten years of home improvement experience, and in her own words, she said: “I love improving the home, and I’m very passionate about keeping the home in the best possible condition. I love it!”

Liana Farrell balances beauty and functionality when she goes about her home improvement jobs.