How to Easily Attach a PUR Faucet Filter in 5 Minutes

AvatarByLiana Farrell Faucet Queries

How to Attach a PUR Filter to Your Faucet

Do you want to improve the taste of your tap water? If so, you may want to consider installing a PUR water filter on your faucet. PUR filters are a great way to remove impurities from your water, making it taste cleaner and fresher. Plus, PUR filters are easy to install and maintain.

In this article, we will show you how to attach a PUR filter to your faucet. We will provide step-by-step instructions, as well as tips and tricks to help you get the job done right.

So if you’re ready to improve the taste of your tap water, read on!

Step Instructions Image
1 Turn off the water supply to the faucet.
2 Remove the old faucet aerator.
3 Screw the Pur filter onto the faucet.
4 Turn on the water supply to the faucet.

A Pur filter is a water filtration device that removes impurities from your tap water. It can improve the taste and quality of your water, and it can also remove harmful bacteria and chemicals. To attach a Pur filter to your faucet, you will need a few tools and materials.

Gather your materials

You will need the following items to attach a Pur filter to your faucet:

  • A Pur filter
  • A faucet wrench
  • A bucket or sink to catch any water that spills
  • Paper towels or a rag

Turn off the water supply to your faucet

Before you can attach the Pur filter to your faucet, you will need to turn off the water supply. This is usually done by turning the shut-off valve located behind the faucet clockwise.

Remove the old faucet aerator

The next step is to remove the old faucet aerator. This is the small, screen-like device that is located at the end of your faucet. To remove the aerator, you will need to use a faucet wrench.

1. Place the faucet wrench on the nut that is located behind the aerator.
2. Turn the faucet wrench clockwise to loosen the nut.
3. Once the nut is loose, you can remove the aerator by hand.

Attach the Pur filter

Now that you have removed the old aerator, you can attach the Pur filter. To do this, simply follow these steps:

1. Place the Pur filter over the end of the faucet.
2. Line up the threads on the filter with the threads on the faucet.
3. Turn the filter clockwise to tighten it onto the faucet.

Turn on the water supply

Once the filter is attached, you can turn on the water supply. The water should flow through the filter and into your faucet.

Test the filter

After you have turned on the water supply, you should test the filter to make sure that it is working properly. To do this, simply run some water through the faucet and taste it. The water should taste clean and fresh.

Attaching a Pur filter to your faucet is a simple process that can improve the quality of your water. By following these steps, you can easily add a Pur filter to your home and enjoy the benefits of filtered water.

How to Attach a Pur Filter to a Faucet

Pur water filters are a great way to improve the quality of your drinking water. They remove impurities such as chlorine, lead, and sediment, and they can also add beneficial minerals like calcium and magnesium. If you’re interested in getting a Pur filter for your home, you’ll need to know how to attach it to your faucet. This guide will walk you through the process step-by-step.

Materials Needed

  • Pur water filter
  • Faucet wrench
  • Plumber’s putty

Step 1: Turn off the water supply

Before you can attach the Pur filter to your faucet, you need to turn off the water supply. This will prevent any water from leaking out of the faucet while you’re working. To turn off the water supply, locate the shut-off valve for your faucet. This valve is usually located underneath the sink. Turn the valve clockwise until it’s completely closed.

Step 2: Remove the old faucet aerator

The next step is to remove the old faucet aerator. The aerator is the small screen that’s attached to the end of the faucet. It helps to reduce splashing and also helps to filter out some impurities from the water. To remove the aerator, use the faucet wrench to loosen the nut that holds it in place. Once the nut is loose, you can pull the aerator off of the faucet.

Step 3: Loosen the faucet connector

The faucet connector is the part of the faucet that connects the faucet to the water supply line. It is usually located underneath the sink. To loosen the faucet connector, use the faucet wrench to turn it counterclockwise.

Be careful not to overtighten the faucet connector, as this could damage the threads.

Step 4: Attach the Pur filter to the faucet connector

The Pur filter should have a threaded connection that matches the threads on the faucet connector. Once you have aligned the threads, turn the Pur filter clockwise until it is snugly in place.

Be careful not to overtighten the Pur filter, as this could damage the threads.

Step 5: Add plumber’s putty

Once the Pur filter is attached to the faucet connector, you should apply a small amount of plumber’s putty around the threads. This will help to seal the connection and prevent any leaks.

Be careful not to use too much plumber’s putty, as this could make it difficult to remove the Pur filter in the future.

Step 6: Turn on the water supply

Now that the Pur filter is attached to the faucet, you can turn on the water supply. Check the faucet for leaks. If there are no leaks, you’re all set!

Attaching a Pur filter to a faucet is a relatively simple process. By following these steps, you can easily improve the quality of your drinking water.

Here are some additional tips for attaching a Pur filter to a faucet:

  • If you’re not comfortable working with plumbing, you can hire a plumber to install the Pur filter for you.
  • Make sure that the Pur filter is compatible with your faucet.
  • Follow the instructions that come with the Pur filter carefully.

By following these tips, you can ensure that your Pur filter is installed correctly and that you’re getting the best possible water filtration.

How do I attach a Pur filter to my faucet?

1. Turn off the water supply to your faucet. This is usually done by turning the shut-off valve located under your sink.
2. Remove the old faucet aerator. This is the small, threaded piece that screws onto the end of your faucet. You can usually do this by hand, but if it’s stuck, you can use a pair of pliers.
3. Screw the Pur filter onto the faucet. Make sure that the filter is screwed on tightly.
4. Turn the water supply back on.
5. Test the filter by running water through it for a few minutes. The water should flow smoothly and without any leaks.

What type of faucet do I need for a Pur filter?

You can use a Pur filter on any type of faucet, as long as it has a threaded aerator. This includes single-handle faucets, double-handle faucets, and pull-down faucets.

How long does it take to install a Pur filter?

The installation process takes about 5 minutes.

How much does a Pur filter cost?

Pur filters range in price from $20 to $40.

How long does a Pur filter last?

Pur filters last for about 6 months.

How do I know when my Pur filter needs to be replaced?

You’ll know when your Pur filter needs to be replaced when the water flow starts to slow down or the water becomes cloudy. You can also check the filter indicator to see if it’s time for a replacement.

How do I clean a Pur filter?

You can clean a Pur filter by running it under hot water for a few minutes. You can also use a mild detergent to clean the filter, but be sure to rinse it thoroughly afterwards.

Can I use a Pur filter with a water softener?

Yes, you can use a Pur filter with a water softener. However, you may need to replace the filter more often if you have a water softener.

Can I use a Pur filter with a reverse osmosis system?

No, you cannot use a Pur filter with a reverse osmosis system. Reverse osmosis systems remove more impurities from water than Pur filters, so using a Pur filter with a reverse osmosis system would be redundant.

In this blog post, we have discussed how to attach a Pur filter to your faucet. We have covered the different types of Pur filters, the steps involved in attaching the filter, and some tips for troubleshooting. We hope that this information has been helpful and that you are now able to attach your Pur filter with ease.

Here are some key takeaways from this blog post:

  • There are two main types of Pur filters: faucet mount filters and pitcher filters. Faucet mount filters are installed directly onto your faucet, while pitcher filters are placed in a pitcher and used to filter water as you pour it.
  • To attach a faucet mount Pur filter, you will need to remove the old aerator from your faucet, attach the filter adapter to the faucet, and then screw the filter onto the adapter.
  • To attach a pitcher filter, you will need to fill the pitcher with water, place the filter in the pitcher, and then pour the water through the filter.
  • If you are having trouble attaching your Pur filter, you can refer to the manufacturer’s instructions or contact customer support for assistance.

Author Profile

Liana Farrell
Liana Farrell
Liana Farrell is the owner of toiletty.com. She is a mom of two and is very passionate about home improvement.

Liana has ten years of home improvement experience, and in her own words, she said: “I love improving the home, and I’m very passionate about keeping the home in the best possible condition. I love it!”

Liana Farrell balances beauty and functionality when she goes about her home improvement jobs.