How to Stop a Leaky Shower Faucet (2-Handle)

AvatarByLiana Farrell Faucet Queries

How to Fix a Leaky Shower Faucet with Two Handles

A leaky shower faucet can be a real pain, wasting water and money. But fixing it is usually a simple DIY project that can be completed in just a few minutes. In this article, we’ll walk you through the steps on how to fix a leaky shower faucet with two handles.

We’ll start by identifying the source of the leak and then taking the necessary steps to repair it. We’ll also provide some tips on how to prevent future leaks. So if you’re ready to get started, let’s get started!

Step Instructions Image
1 Turn off the water supply to the faucet.
2 Remove the handle covers.
3 Loosen the screws that hold the cartridge in place.
4 Remove the cartridge.
5 Inspect the cartridge for damage.
6 Replace the cartridge if necessary.
7 Reassemble the faucet.
8 Turn on the water supply to the faucet.

How To Fix a Leaky Shower Faucet Two Handle

A leaky shower faucet can be a major annoyance, and it can also waste a lot of water. If you have a leaky shower faucet, it’s important to fix it as soon as possible.

This guide will show you how to fix a leaky shower faucet two handle. We’ll walk you through the steps, so you can get your faucet fixed in no time.

1. Identify the source of the leak

The first step to fixing a leaky shower faucet is to identify the source of the leak. There are a few common places where leaks can occur on a shower faucet:

  • The faucet handle: If the faucet handle is leaking, you’ll usually be able to see water dripping from the handle itself.
  • The faucet stem: The faucet stem is the part of the faucet that connects the handle to the faucet body. If the faucet stem is leaking, you’ll usually be able to see water dripping from the base of the faucet handle.
  • The faucet body: The faucet body is the part of the faucet that contains the valves. If the faucet body is leaking, you’ll usually be able to see water dripping from the bottom of the faucet.

Once you’ve identified the source of the leak, you can move on to the next step.

2. Turn off the water supply to the faucet

Before you can fix a leaky shower faucet, you need to turn off the water supply to the faucet. This will prevent any further water damage from occurring.

To turn off the water supply to the faucet, you’ll need to find the shut-off valve. The shut-off valve is usually located near the faucet, and it’s usually a red or blue valve.

Once you’ve found the shut-off valve, turn it clockwise to turn off the water supply to the faucet.

3. Remove the faucet handle

The next step is to remove the faucet handle. This will give you access to the faucet stem, which is where the leak is most likely to be occurring.

To remove the faucet handle, you’ll need to use a screwdriver to loosen the screws that hold the handle in place. Once the screws are loose, you can carefully pry the handle off of the faucet.

4. Repair the leak

Once you’ve removed the faucet handle, you can inspect the faucet stem for damage. If the faucet stem is damaged, you’ll need to replace it.

To replace the faucet stem, you’ll need to purchase a new faucet stem that is the same size and type as the old one. Once you have the new faucet stem, you can install it by following the instructions that came with the new stem.

5. Reinstall the faucet handle

Once you’ve repaired the leak, you can reinstall the faucet handle. To do this, simply reverse the steps you took to remove the handle.

6. Turn on the water supply to the faucet

Now that you’ve repaired the leak, you can turn on the water supply to the faucet. Make sure to check for any leaks before you use the faucet.

If you have any trouble fixing the leak, you may need to call a plumber.

This guide has shown you how to fix a leaky shower faucet two handle. By following these steps, you can get your faucet fixed in no time.

3. Remove the handle(s) and stem(s).

To remove the handle(s) and stem(s) of a two-handle shower faucet, you will need the following tools:

  • A screwdriver
  • A wrench
  • A pair of pliers

1. Turn off the water supply to the faucet.
2. Locate the setscrews that hold the handle(s) in place. These screws are typically located on the back of the handle(s).
3. Use a screwdriver to loosen the setscrews.
4. Once the setscrews are loosened, you can remove the handle(s) by pulling them straight off.
5. Use a wrench to loosen the nuts that hold the stem(s) in place. These nuts are typically located under the handle(s).
6. Once the nuts are loosened, you can remove the stem(s) by pulling them straight out.

4. Repair or replace the O-ring(s).

The O-rings in a two-handle shower faucet are located between the handle(s) and the stem(s). These O-rings help to seal the faucet and prevent leaks. If the O-rings are damaged or worn out, they can cause the faucet to leak.

To repair or replace the O-rings, you will need the following tools:

  • A screwdriver
  • A pair of pliers
  • A new O-ring

1. Turn off the water supply to the faucet.
2. Remove the handle(s) and stem(s) from the faucet.
3. Locate the O-rings. These O-rings are typically located on the inside of the handle(s) and the stem(s).
4. Use a screwdriver or pliers to remove the old O-rings.
5. Apply a small amount of plumber’s grease to the new O-rings.
6. Insert the new O-rings into the faucet.
7. Reassemble the faucet.
8. Turn on the water supply to the faucet.

If the faucet is still leaking after you have replaced the O-rings, you may need to replace the faucet cartridge.

By following these steps, you can easily fix a leaky two-handle shower faucet. If you are not comfortable doing this yourself, you can always call a plumber to help you.

How do I fix a leaky shower faucet with two handles?

1. Turn off the water supply to the faucet. This is usually located at the back of the faucet or under the sink.
2. Remove the handle covers. These are usually held in place by small screws or clips.
3. Locate the O-rings. These are small rubber rings that seal the faucet handles to the body of the faucet.
4. Inspect the O-rings for damage. If the O-rings are cracked, torn, or missing, they will need to be replaced.
5. Apply a thin coat of plumber’s grease to the new O-rings. This will help to create a watertight seal.
6. Reinstall the O-rings and the handle covers.
7. Turn on the water supply to the faucet and test to make sure that the leak is fixed.

What are the most common causes of a leaky shower faucet with two handles?

The most common causes of a leaky shower faucet with two handles are:

  • Damaged O-rings. The O-rings are small rubber rings that seal the faucet handles to the body of the faucet. If the O-rings are damaged, they will not be able to create a watertight seal, which will cause the faucet to leak.
  • Loose faucet handles. The faucet handles can become loose over time, which can allow water to leak out of the faucet.
  • Corroded faucet parts. The faucet parts can corrode over time, which can cause the faucet to leak.

How can I prevent a leaky shower faucet with two handles?

There are a few things you can do to prevent a leaky shower faucet with two handles, including:

  • Inspect the faucet regularly for damage. If you notice any damage to the O-rings, faucet handles, or other parts of the faucet, have them repaired or replaced as soon as possible.
  • Apply a thin coat of plumber’s grease to the O-rings every few months. This will help to keep the O-rings in good condition and prevent them from drying out and cracking.
  • Tighten the faucet handles every few months. If the faucet handles are loose, they can allow water to leak out of the faucet.
  • Flush the faucet regularly. Flushing the faucet will help to remove any sediment or debris that may be blocking the faucet and causing it to leak.

What should I do if I can’t fix the leak myself?

If you can’t fix the leak yourself, you should call a plumber. A plumber will be able to diagnose the problem and fix the leak quickly and efficiently.

In this article, we have discussed how to fix a leaky shower faucet with two handles. We first identified the most common causes of leaks, including worn-out washers, loose or damaged O-rings, and calcium buildup. We then provided step-by-step instructions on how to repair each of these problems.

We hope that this article has been helpful in teaching you how to fix a leaky shower faucet with two handles. If you have any further questions, please do not hesitate to contact a qualified plumber.

Here are some key takeaways from this article:

  • The most common causes of leaks in shower faucets with two handles are worn-out washers, loose or damaged O-rings, and calcium buildup.
  • To fix a leaky shower faucet with two handles, you will need to remove the faucet handles, identify the source of the leak, and replace the necessary parts.
  • If you are not comfortable working with plumbing fixtures, it is best to hire a qualified plumber to fix your leaky shower faucet.

Author Profile

Liana Farrell
Liana Farrell
Liana Farrell is the owner of toiletty.com. She is a mom of two and is very passionate about home improvement.

Liana has ten years of home improvement experience, and in her own words, she said: “I love improving the home, and I’m very passionate about keeping the home in the best possible condition. I love it!”

Liana Farrell balances beauty and functionality when she goes about her home improvement jobs.