How to Remove a Toilet Paper Holder From the Wall (Without Damaging Your Walls)

AvatarByLiana Farrell Toilet Queries

How to Remove a Toilet Paper Holder from the Wall

Toilet paper holders are a convenient way to keep your bathroom stocked with toilet paper, but they can also be a pain to remove when you need to replace them or change the location. If you’re not sure how to remove a toilet paper holder from the wall, don’t worry – we’re here to help. In this article, we’ll walk you through the process step-by-step, so you can get the job done quickly and easily.

We’ll also provide some tips on how to choose the right toilet paper holder for your bathroom, and how to install it correctly so that it stays in place. So whether you’re a first-time homeowner or you’re just looking for a refresher, read on for all the information you need to know about removing a toilet paper holder from the wall.

Step Instructions Image
1 Locate the screws that hold the toilet paper holder to the wall.
2 Use a screwdriver to unscrew the screws.
3 Gently pull the toilet paper holder away from the wall.

A toilet roll holder is a convenient way to keep toilet paper within reach, but it can also be a pain to remove if you need to replace it or change the location. This guide will walk you through the steps of removing a toilet roll holder from a wall, including the tools and materials you’ll need, the steps involved, and some tips for avoiding damage to your wall.

Gather Your Tools and Materials

To remove a toilet roll holder from a wall, you will need the following tools and materials:

  • Tape measure
  • Level
  • Pencil
  • Safety glasses
  • Pliers
  • Screwdriver
  • Hammer
  • Utility knife
  • Saw

Prepare the Area

Before you begin removing the toilet roll holder, you will need to prepare the area. This includes turning off the water supply to the toilet and removing the toilet seat. You should also cover the floor with a drop cloth to protect it from damage.

Remove the Toilet Roll Holder

Once you have prepared the area, you can begin removing the toilet roll holder. The following steps will walk you through the process:

1. Locate the screws that hold the toilet roll holder to the wall.
2. Use a screwdriver to loosen the screws.
3. If the screws are stuck, you can use pliers to grip the heads of the screws and turn them.
4. Once the screws are loosened, you can remove the toilet roll holder from the wall.

Tips for Avoiding Damage to Your Wall

When removing a toilet roll holder from a wall, it is important to take steps to avoid damaging the wall. Here are a few tips:

  • Use a level to make sure that the toilet roll holder is installed straight. This will help to prevent the screws from tearing through the drywall.
  • Use screws that are the correct length for the drywall. If the screws are too long, they can damage the drywall.
  • Pre-drill holes for the screws. This will help to prevent the screws from splitting the drywall.
  • Use a hammer to tap the screws into the wall. This will help to prevent the screws from damaging the drywall.

Removing a toilet roll holder from a wall is a relatively simple task, but it is important to take steps to avoid damaging the wall. By following the steps in this guide, you can safely and easily remove your toilet roll holder.

How to Remove a Toilet Roll Holder from the Wall

3. Remove the Toilet Roll Holder

To remove the toilet roll holder, you will need to:

1. Locate the screws that hold the toilet roll holder to the wall.
2. Use a screwdriver to remove the screws.
3. If the screws are stuck, you may need to use a hammer to loosen them.
4. Carefully pry the toilet roll holder away from the wall.

Locating the Screws

The first step is to locate the screws that hold the toilet roll holder to the wall. These screws are typically located on the back of the toilet roll holder, but they may also be located on the sides or bottom. If you cannot find the screws, you may need to remove the toilet paper roll to see if you can locate them.

Removing the Screws

Once you have located the screws, you can use a screwdriver to remove them. If the screws are stuck, you may need to use a hammer to loosen them. Be careful not to damage the wall when you are removing the screws.

Prying the Toilet Roll Holder Away from the Wall

Once you have removed the screws, you can pry the toilet roll holder away from the wall. You can do this by using a putty knife or a flathead screwdriver. Be careful not to damage the wall when you are prying the toilet roll holder away.

Replacing the Toilet Roll Holder

Once you have removed the toilet roll holder, you can replace it with a new one. To do this, you will need to:

1. Choose a new toilet roll holder that is the right size for your bathroom.
2. Mark the location of the screws on the wall.
3. Drill holes in the wall for the screws.
4. Insert the screws into the holes and tighten them.
5. Attach the toilet roll holder to the screws.

Removing a toilet roll holder from the wall is a relatively simple task. By following these steps, you can easily remove the toilet roll holder and replace it with a new one.

How do I remove a toilet paper holder from the wall?

1. Locate the screws or nails that hold the toilet paper holder in place. They are typically located on the back of the holder, near the top.
2. Use a screwdriver or drill to remove the screws or nails. Be careful not to damage the wall.
3. Gently pull the toilet paper holder away from the wall. If it is stuck, you may need to use a pry bar or other tool to loosen it.
4. Clean the wall where the toilet paper holder was installed. You may need to use a putty knife or other tool to remove any remaining adhesive.

What if the toilet paper holder is stuck to the wall?

If the toilet paper holder is stuck to the wall, you can try using a hair dryer to heat up the adhesive. Once the adhesive is heated, it will be easier to remove the toilet paper holder. You can also try using a putty knife or other tool to loosen the adhesive.

What if I don’t have a screwdriver or drill?

If you don’t have a screwdriver or drill, you can try using a butter knife or other sharp object to pry the screws or nails out of the wall. Be careful not to damage the wall.

What if I can’t find the screws or nails?

If you can’t find the screws or nails, you can try using a strong magnet to locate them. Once you have located the screws or nails, you can use a screwdriver or drill to remove them.

What if the toilet paper holder is damaged?

If the toilet paper holder is damaged, you can try replacing it with a new one. You can find a variety of toilet paper holders at hardware stores and home improvement stores.

removing a toilet roll holder from a wall is a simple task that can be completed in a few minutes. By following the steps outlined in this article, you can easily remove your toilet roll holder without damaging the wall or the holder itself.

Here are the key takeaways from this article:

  • To remove a toilet roll holder from a wall, you will need a screwdriver, a hammer, and a putty knife.
  • First, unscrew the screws that hold the toilet roll holder to the wall.
  • Next, use the hammer to gently tap the toilet roll holder until it pops off the wall.
  • Finally, use the putty knife to remove any remaining adhesive from the wall.

By following these steps, you can easily remove your toilet roll holder and replace it with a new one.

Author Profile

Liana Farrell
Liana Farrell
Liana Farrell is the owner of toiletty.com. She is a mom of two and is very passionate about home improvement.

Liana has ten years of home improvement experience, and in her own words, she said: “I love improving the home, and I’m very passionate about keeping the home in the best possible condition. I love it!”

Liana Farrell balances beauty and functionality when she goes about her home improvement jobs.