How To Take Off A Toilet?

AvatarByLiana Farrell Toilet Queries

How to Take Off a Toilet

A toilet is a plumbing fixture that is used to flush human waste away from the home. It is a common fixture in most homes, and it is important to know how to take it off if it needs to be repaired or replaced.

This article will provide you with a step-by-step guide on how to take off a toilet. We will cover the tools and materials you will need, as well as the steps involved in the process. By the end of this article, you will be able to remove a toilet from your home with confidence.

What You Will Need

To take off a toilet, you will need the following tools and materials:

  • A plunger
  • A hacksaw
  • A screwdriver
  • A putty knife
  • A bucket
  • A pair of gloves
  • A rag
  • Plumbing tape
  • New wax ring

Steps

1. Turn off the water supply to the toilet. This is usually located under the sink or behind the toilet.
2. Flush the toilet to drain the water from the tank.
3. Remove the lid of the toilet tank.
4. Locate the two bolts that hold the toilet to the floor. They are usually located on the back of the toilet, near the bottom.
5. Use a hacksaw to cut the bolts. Be careful not to damage the toilet bowl.
6. Use a screwdriver to pry the toilet off of the floor.
7. Use a putty knife to remove the old wax ring from the floor.
8. Clean the area where the toilet was installed.
9. Apply a new wax ring to the floor.
10. Position the toilet over the wax ring.
11. Secure the toilet to the floor with the two bolts.
12. Turn on the water supply to the toilet.
13. Flush the toilet to test the seal.

By following these steps, you will be able to remove a toilet from your home with confidence. If you have any questions or concerns, please consult with a professional plumber.

Step Tools Instructions
1 Plunger, bucket, gloves, towels, adjustable wrench, screwdriver Turn off the water supply to the toilet. Flush the toilet to empty the tank. Place a bucket under the toilet to catch any water that may leak out. Put on gloves and towels to protect yourself from water and debris.
2 Adjustable wrench, screwdriver Locate the water supply valve under the toilet. Turn the valve clockwise to shut off the water supply. Use a screwdriver to loosen the nuts that connect the water supply line to the toilet.
3 Plunger, bucket, towels Place the plunger in the toilet bowl and push down firmly. Pull up on the plunger and repeat this motion several times to loosen the wax seal. Once the wax seal is loosened, remove the plunger and bucket.
4 Adjustable wrench, screwdriver Use a screwdriver to loosen the nuts that connect the toilet to the floor. Once the nuts are loosened, lift up on the toilet and pull it away from the floor.
5 Plunger, bucket, towels Clean the floor where the toilet was sitting. Apply a new wax seal to the bottom of the toilet. Place the toilet back on the floor and connect the water supply line. Turn the water supply valve back on. Flush the toilet to test the seal.

Toilet removal is a relatively simple task that can be completed in about 30 minutes. However, it is important to follow the proper steps to avoid damaging the toilet or your plumbing. This guide will walk you through the process of removing a toilet, step-by-step.

Gather Your Tools and Materials

Before you begin, gather the following tools and materials:

  • Adjustable wrench
  • Pliers
  • Penetrating oil
  • Utility knife
  • Bucket
  • Gloves
  • Work clothes

Shut Off the Water Supply

The first step is to shut off the water supply to the toilet. This is usually located behind the toilet, near the floor. There will be a valve that you can turn to stop the flow of water.

Once the water supply is turned off, flush the toilet to drain any remaining water.

Remove the Toilet Seat

The next step is to remove the toilet seat. There are two bolts that hold the seat in place. These bolts are located on the back of the toilet, under the seat. Use a wrench to loosen the bolts and remove the seat.

Loosen the Nuts at the Base of the Toilet

Now that the toilet seat is removed, you can begin to loosen the nuts at the base of the toilet. These nuts are located on the bolts that connect the toilet to the floor. Use a wrench to loosen the nuts until they are just about to come off.

Apply Penetrating Oil to the Bolts

Before you remove the bolts, apply a penetrating oil to them. This will help to loosen them and make them easier to remove. Allow the penetrating oil to sit for a few minutes before continuing.

Remove the Bolts and Lift the Toilet

Once the bolts are loosened, you can remove them and lift the toilet off of the floor. Be careful not to drop the toilet, as it is heavy.

Disconnect the Water Supply Line

The water supply line is connected to the bottom of the toilet. Use a utility knife to cut the line, being careful not to damage the pipe.

Disconnect the Sewer Line

The sewer line is connected to the back of the toilet. Use a wrench to loosen the nut that connects the line to the toilet.

Remove the Toilet

Now that the toilet is disconnected from the water supply and sewer line, you can remove it from the bathroom. Be careful not to damage the floor, as the toilet is heavy.

Clean Up the Area

Once the toilet is removed, clean up the area. Be sure to remove any debris that may have fallen into the hole where the toilet was.

Install a New Toilet

If you are replacing the toilet, you can now install a new one. Follow the instructions that came with the new toilet to complete the installation.

Removing a toilet is a relatively simple task that can be completed in about 30 minutes. However, it is important to follow the proper steps to avoid damaging the toilet or your plumbing. This guide has provided you with the steps necessary to remove a toilet safely and effectively.

3. Remove the Toilet Seat

There are two bolts that hold the toilet seat in place. One bolt is located on the back of the toilet seat, and the other bolt is located on the front of the toilet seat. To remove the toilet seat, you will need to loosen these bolts and then remove the seat.

To loosen the bolts, you will need a wrench. A crescent wrench or a socket wrench will work. If you are using a crescent wrench, you will need to hold the nut on the bottom of the bolt with your fingers while you loosen the bolt with the wrench. If you are using a socket wrench, you will need to insert the socket onto the bolt and then turn the wrench to loosen the bolt.

Once you have loosened both bolts, you can remove the toilet seat. To do this, simply lift up on the front of the seat and then pull it forward. The seat should come off easily.

4. Disconnect the Water Supply Line

The water supply line is a flexible hose that connects the toilet to the water supply valve. To disconnect the water supply line, you will need to use a pair of pliers.

First, locate the water supply valve. The water supply valve is usually located on the wall behind the toilet. Once you have located the water supply valve, turn off the water supply to the toilet.

Next, use the pliers to disconnect the water supply line from the toilet. To do this, simply grasp the nut on the end of the water supply line with the pliers and turn it counterclockwise. The water supply line should come off easily.

Once you have disconnected the water supply line, you can turn the water supply back on to the toilet.

5. Remove the Toilet Bowl

To remove the toilet bowl, you will need to loosen the bolts that hold the toilet bowl to the floor. There are two bolts located on the back of the toilet bowl and two bolts located on the sides of the toilet bowl. To loosen the bolts, you will need a wrench. A crescent wrench or a socket wrench will work.

To loosen the bolts, you will need to hold the nut on the bottom of the bolt with your fingers while you loosen the bolt with the wrench. If you are using a crescent wrench, you will need to hold the nut on the bottom of the bolt with your fingers while you loosen the bolt with the wrench. If you are using a socket wrench, you will need to insert the socket onto the bolt and then turn the wrench to loosen the bolt.

Once you have loosened all four bolts, you can remove the toilet bowl. To do this, simply lift up on the front of the toilet bowl and then pull it forward. The toilet bowl should come off easily.

6. Remove the Wax Ring

The wax ring is a rubber ring that seals the toilet to the floor. To remove the wax ring, you will need to use a putty knife.

First, locate the wax ring. The wax ring is a black or brown ring that is located around the bottom of the toilet bowl. Once you have located the wax ring, use the putty knife to pry it up. The wax ring should come off easily.

7. Clean the Toilet Floor

Once you have removed the toilet bowl, you will need to clean the toilet floor. To do this, you will need a cleaning solution and a brush.

First, mix the cleaning solution according to the directions on the bottle. Then, pour the cleaning solution onto the toilet floor. Next, use the brush to scrub the toilet floor. Finally, rinse the toilet floor with water.

8. Install the New Toilet

To install the new toilet, you will need to follow these steps:

1. Place the new toilet bowl on top of the toilet flange.
2. Align the holes in the toilet bowl with the bolts in the floor.
3. Insert the bolts through the holes in the toilet bowl and into the floor.
4. Tighten the bolts with a wrench.
5. Apply a new wax ring to the bottom of the toilet bowl.
6. Place the toilet bowl on top of the wax ring.
7. Align the holes in the toilet bowl with the bolts in the floor.
8. Insert the bolts through the holes in the toilet bowl and into the floor.
9. Tighten the bolts with a wrench.
10. Connect the water supply line to the toilet.
11. Turn on the water supply to the toilet.
12. Flush the toilet to test the installation.

Replacing a toilet is

How do I remove a toilet?

1. Turn off the water supply to the toilet. This is usually located under the sink or in the basement.
2. Flush the toilet to empty the tank.
3. Remove the caps on the water supply valves. These are typically located on the back of the toilet, near the bottom.
4. Use a wrench to loosen the nuts that connect the water supply lines to the toilet.
5. Pull the water supply lines out of the toilet.
6. Use a putty knife or flathead screwdriver to loosen the wax ring around the base of the toilet.
7. Grab the toilet with both hands and rock it back and forth until it is loose.
8. Pull the toilet straight up and off the floor.
9. Clean the toilet flange and the floor where the toilet was installed.
10. Apply a new wax ring to the toilet flange.
11. Position the toilet over the flange and lower it down.
12. Connect the water supply lines to the toilet.
13. Turn on the water supply to the toilet.
14. Flush the toilet to check for leaks.

What tools do I need to remove a toilet?

You will need the following tools to remove a toilet:

  • A wrench
  • A putty knife or flathead screwdriver
  • A pair of pliers
  • A bucket
  • A shop vac

How long does it take to remove a toilet?

It typically takes about 30 minutes to remove a toilet.

What if the toilet is stuck?

If the toilet is stuck, you can try the following:

  • Spray some WD-40 or a similar lubricant around the base of the toilet.
  • Use a hammer and chisel to loosen the wax ring.
  • Use a pry bar to pry the toilet off the floor.

What if I damage the toilet when I remove it?

If you damage the toilet when you remove it, you will need to replace the toilet.

What is the best way to clean a toilet flange?

The best way to clean a toilet flange is to use a toilet bowl cleaner and a brush. You can also use a vinegar and baking soda solution.

What is the best way to prevent a toilet from leaking?

The best way to prevent a toilet from leaking is to make sure that the wax ring is properly installed. You can also use a leak detection kit to check for leaks.

In this article, we have discussed how to take off a toilet. We have covered the steps in detail, from removing the bolts that hold the toilet to disconnecting the water supply and sewer line. We have also provided tips on how to avoid common mistakes.

We hope that this article has been helpful. If you have any questions, please do not hesitate to contact us.

Here are some key takeaways from this article:

  • Before you begin, make sure you have the right tools and materials.
  • Turn off the water supply to the toilet.
  • Remove the bolts that hold the toilet to the floor.
  • Disconnect the water supply and sewer line.
  • Carefully lift the toilet off the floor and set it aside.
  • Clean the area where the toilet was installed.
  • Install the new toilet.
  • Turn on the water supply and check for leaks.

By following these steps, you can easily remove a toilet and install a new one.

Author Profile

Liana Farrell
Liana Farrell
Liana Farrell is the owner of toiletty.com. She is a mom of two and is very passionate about home improvement.

Liana has ten years of home improvement experience, and in her own words, she said: “I love improving the home, and I’m very passionate about keeping the home in the best possible condition. I love it!”

Liana Farrell balances beauty and functionality when she goes about her home improvement jobs.