How to Bypass a Delta Touch Faucet Solenoid

AvatarByLiana Farrell Faucet Queries

How to Bypass a Delta Touch Faucet Solenoid

Your Delta touch faucet is a convenient way to turn on the water, but what happens if the solenoid fails? Don’t worry, you can still use your faucet by bypassing the solenoid. In this article, we’ll show you how to bypass a Delta touch faucet solenoid in just a few simple steps.

We’ll start by explaining what a solenoid is and how it works. Then, we’ll show you how to identify the solenoid on your faucet. Finally, we’ll walk you through the steps of bypassing the solenoid so that you can get your faucet working again.

By the end of this article, you’ll know everything you need to know about bypassing a Delta touch faucet solenoid. So, if your solenoid ever fails, you’ll be able to fix it yourself in no time.

“`html

Step Instructions Image
1 Turn off the water supply to the faucet.
2 Locate the solenoid valve. It is a small, cylindrical device that is typically located behind the faucet handle.
3 Disconnect the solenoid valve from the water supply line.
4 Turn on the water supply to the faucet.
5 The faucet should now be working without the solenoid valve.

“`

What is a Delta Touch Faucet Solenoid?

A Delta Touch Faucet Solenoid is a type of solenoid valve that is used to control the flow of water in a Delta Touch Faucet. The solenoid valve is activated by a small electrical current, which causes the plunger inside the valve to move and open or close the valve. This allows you to control the flow of water to the faucet by simply touching the faucet handle.

How to Bypass a Delta Touch Faucet Solenoid

If the solenoid valve in your Delta Touch Faucet fails, you may need to bypass the valve in order to restore the flow of water to the faucet. To bypass the solenoid valve, you will need to follow these steps:

1. Turn off the water supply to the faucet.
2. Remove the faucet handle.
3. Locate the solenoid valve.
4. Disconnect the wires from the solenoid valve.
5. Connect a jumper wire between the two terminals on the solenoid valve.
6. Turn on the water supply to the faucet.

The jumper wire will bypass the solenoid valve and allow the water to flow to the faucet. If the solenoid valve is not the problem, you will need to replace it.

Bypassing a Delta Touch Faucet Solenoid is a simple process that can be completed in a few minutes. However, if the solenoid valve is not the problem, you will need to replace it. If you are not comfortable working with plumbing, you should call a qualified plumber to help you.

How Do You Bypass A Delta Touch Faucet Solenoid?

A Delta touch faucet solenoid is a small, cylindrical device that controls the flow of water through the faucet. It is located inside the faucet body, and it is activated by a small magnet that is attached to the faucet handle. When you turn the handle, the magnet moves the solenoid plunger, which opens or closes the valve that controls the water flow.

If the solenoid fails, the faucet will not work properly. You may be able to bypass the solenoid by using a manual valve. This is a temporary solution, and you should eventually have the solenoid repaired or replaced.

To bypass a Delta touch faucet solenoid, you will need the following tools and materials:

  • A Phillips head screwdriver
  • A flathead screwdriver
  • A pair of pliers
  • A manual valve

Step-by-Step Instructions

1. Turn off the water supply to the faucet.
2. Remove the faucet handle by unscrewing the two screws that hold it in place.
3. Locate the solenoid. It is a small, cylindrical device that is located inside the faucet body.
4. Disconnect the wires from the solenoid.
5. Install the manual valve in the place of the solenoid.
6. Turn on the water supply to the faucet.

The manual valve will allow you to control the flow of water through the faucet. You can turn the valve to open or close the water flow.

Bypassing a Delta touch faucet solenoid is a temporary solution. You should eventually have the solenoid repaired or replaced.

Here are some additional tips for troubleshooting a Delta touch faucet:

  • If the faucet is dripping, check the O-rings. The O-rings are small, rubber rings that seal the faucet valves. If they are worn or damaged, they can allow water to leak.
  • If the faucet is not turning on, check the water supply. Make sure that the water is turned on to the faucet.
  • If the faucet is not turning off, check the handle. The handle may be stuck in the open position. Try to gently move the handle to the closed position.

If you are unable to fix the faucet yourself, you can contact a qualified plumber for help.

How do you bypass a Delta touch faucet solenoid?

1. Turn off the water supply to the faucet.
2. Remove the faucet handle.
3. Locate the solenoid valve.
4. Disconnect the solenoid valve from the water supply line.
5. Connect a jumper wire between the solenoid valve terminals.
6. Turn on the water supply to the faucet.

What are the symptoms of a bad Delta touch faucet solenoid?

  • The faucet will not turn on or off.
  • The faucet leaks when it is turned off.
  • The faucet makes a humming or buzzing noise when it is turned on.
  • The faucet does not produce enough water pressure.

How do I replace a Delta touch faucet solenoid?

1. Turn off the water supply to the faucet.
2. Remove the faucet handle.
3. Remove the old solenoid valve.
4. Install the new solenoid valve.
5. Connect the solenoid valve to the water supply line.
6. Turn on the water supply to the faucet.

Can I bypass a Delta touch faucet solenoid without turning off the water supply?

It is not recommended to bypass a Delta touch faucet solenoid without turning off the water supply. Doing so could damage the faucet or cause a flood.

What are the advantages of bypassing a Delta touch faucet solenoid?

  • You can save money on repairs by bypassing the solenoid valve.
  • You can avoid the hassle of having to replace the solenoid valve.
  • You can keep your faucet in working order until you can afford to have the solenoid valve repaired or replaced.

What are the disadvantages of bypassing a Delta touch faucet solenoid?

  • Bypassing the solenoid valve can damage the faucet or cause a flood.
  • Bypassing the solenoid valve may void the warranty on your faucet.
  • Bypassing the solenoid valve may make your faucet less efficient.

    bypassing a Delta touch faucet solenoid is a relatively simple process that can be completed in just a few minutes. By following the steps outlined in this article, you can restore functionality to your faucet without having to replace the entire solenoid.

Here are the key takeaways from this article:

  • The solenoid is a small, cylindrical device that is responsible for controlling the flow of water in a Delta touch faucet.
  • If the solenoid fails, the faucet will no longer be able to turn on or off.
  • To bypass the solenoid, you will need to disconnect the wires that connect it to the faucet.
  • Once the wires are disconnected, you can turn on the faucet and verify that it is working properly.

By following these steps, you can quickly and easily restore functionality to your Delta touch faucet.

Author Profile

Liana Farrell
Liana Farrell
Liana Farrell is the owner of toiletty.com. She is a mom of two and is very passionate about home improvement.

Liana has ten years of home improvement experience, and in her own words, she said: “I love improving the home, and I’m very passionate about keeping the home in the best possible condition. I love it!”

Liana Farrell balances beauty and functionality when she goes about her home improvement jobs.